Why the button on iPhone 6 does not work. Treatment of the Power and Home buttons on the iPhone. Software problems with the Home button
Owners of the iPhone 5s and other models with a modified Home button over time are faced with the fact that the button begins to stick, click, jam, or stop working altogether. Let's consider ways to independently solve this problem.
Reasons why the Home button fails on iPhone and iPad
Reasons why the Home button may not work correctly include the following:
- software glitches;
- mechanical damage:
- clogged mechanism and contact pad;
- moisture ingress;
- button sticking;
- blows.
Ways to solve the problem depending on the cause of the failure
Faults that can cause the Home button to malfunction are divided into software and hardware.
Software glitch
If the Home button does not work well due to a software glitch, then the problem can be easily solved using calibration:
Video: how to calibrate the Home button on iPhone/iPad
Mechanical damage and blockages
The problem with the Home button can also occur due to hardware faults.
Adjusting the position of the standard connector
To adjust the position of the standard connector:
- Connect a basic USB cable to your iPhone.
- Place your finger under the plug inserted into the connector.
- In the Bottom-Up direction, press the plug and press the Home button.
If the button does not start working, do not try to press harder. This will only lead to mechanical failure of the connector.
Cleaning the Contact Pad
To clean the button and surface, you will need special lubricants and cleaning agents, for example, alcohol and WD-40 (“Vedeshka”). To clean the surface with the latter:
The same steps can be followed using regular alcohol, only after applying you should wait a few minutes until it evaporates.
This method of cleaning the surface of an iOS device from debris is simple and fast. However, professional internal cleaning, which is highly discouraged from doing it yourself, is considered more effective.
If the button is damaged
If there are signs of damage on the button or device and the Home button does not respond, then most likely the key connector is damaged or disconnected. In this case, there are 2 ways out of the situation:
- Repair at the service center.
- Assigning home button functions to gestures.
To add the Home button to the home screen:
Video: How to activate AssistiveTouch
One of the methods listed should help you solve the problem with the functionality of the Home button. If self-correction does not fix the problem, do not waste time and do not risk “breaking” the device, but contact a service center.
After years of using your iPhone, the Home button can become annoying. Not for everyone, of course, but such cases cannot be called isolated either.
Immediately after purchase, iphone 5s, iphone 7, iphone 6, iphone 5, iphone 6s, iphone 5c, iphone 4, iphone 7 plus, iphone 6 plus, iphone 4s, iphone 4, iphone x work perfectly.
The problem starts over time. After long-term use of an iPhone 5s, iPhone 5, iPhone 6, iPhone 5s, iPhone 4, iPhone 4s, iPhone 7... the Home button sometimes does not work well - after one time or less it stops responding to your commands.
Over time, you will have to press it several times to get the device to respond at all.
This is one of the main disadvantages of devices, which is a decrease in sensitivity to pressing the Home button.
The problem lies in the technical equipment and the only solution is often to improve the corresponding contacts, but recently the solution to calibrate the home button has become popular, which improves its performance.
Personally, I don’t believe in the effectiveness of calibration, but nothing prevents you from applying this process - instructions below.
By the way, there is a program that quickly corrects errors in the iPhone - I recommend trying it to solve your problem -
iPhone home button doesn't work - calibrate it
To successfully calibrate the Home button, launch any system application, for example Weather.
Hold the Power button until a bar appears at the top with the information "Disable". Then press and hold the Home button until the open app closes and you are taken to SpringBoard
My iPhone's home button doesn't work - use an alternative one
What to do if calibration did not bring any improvement and you want to take responsibility for repairing it yourself.
Then you can display the virtual home button. To use this setting, you must enable one of the available features built into iOS.
It's called AssistiveTouch. To do this, go to Settings > General > Accessibility > AssistiveTouch.
Once this feature is activated, a translucent button will appear on the screen. If its location does not suit you or obscures another element below it, you can drag it to another location on the screen.
Pressing the button brings up a menu where there is a virtual home button. Clicking on it will work like clicking on a physical one.
In addition, AssistiveTouch performs more tasks. The menu has additional buttons: “Siri”, “Notification Center” and “Control Center”, “Favorites” and others.
Clicking on "Devices" will give you access to the following options: lock or rotate the screen, turn off the device, adjust volume and mute.
You will also find the “Program Switching” and “Screen Capture” functions. The purpose of introducing AssistiveTouch was to make iPhone easier to use for people who have difficulty touching the screen or pressing physical buttons, particularly the Home button.
Therefore, some of the available functions from the menu allow you to replace them or enter your own algorithm.
Even with Apple devices, what happens is that something stops working properly, often this is reflected in the physical buttons.
Thanks to the AssistiveTouch function, you can partially solve the issue in case of problems with the home button.
The home button on the iPhone doesn’t work—correct the position of the connector
Owners of iPhone 4 and 4S sometimes encounter a situation where the home button does not respond to touch at all.
If this also affects your smartphone, then try the trick with a 30-pin standard connector.
To do this, connect a USB cable to your iPhone. Then place your finger under the plug inserted into the connector, slowly press the plug “Bottom-Up” and press the Home button.
If the button does not start working, then do not try to press harder - a little effort is enough.
The home button on your iPhone doesn’t work – clean and lubricate the mechanism
If the Home button is not working, you can try cleaning and lubricating it. To do this, you can use alcohol and WD-40.
To do this, with your smartphone turned off, apply a little product to the home button and press it several times until the liquid penetrates into the gaps.
Be careful, WD-40 is highly fluid and will easily penetrate even the tiniest places.
Wait a few minutes and you can check. For some, such actions helped return the Home button to functionality.
Only if you have mechanical damage to your face, then none of the options described above will work - you don’t even have to try.
If you're a little tinkerer with electronics, you can simply buy a new button with a cable for your iPhone and replace it yourself. Good luck.
At any moment, the Home button starts to act up and jam, and slow down terribly, annoying the owner of the gadget. Most often, this problem occurs due to a software failure, in which case the problem can be solved quite simply. But it happens that time is to blame. Everything gets old, as they say, when the mechanism wears out, you will have to make more efforts to restore the operation of the button.
Whatever the reason, do not rush to contact service centers, we want to offer you 4 ways to solve the problem when Home button not working on iPhone.
Method 1:
This method refers to the first option for the cause of the failure. If the button becomes less responsive, try simply calibrating it.
To do this, you need to open any application, for example, weather and hold down the power button of your device, do this until the “shutdown” bar appears. Then press the Home button until the previously appeared “shutdown” bar disappears. After the manipulations, everything should work as before.
Method 2:
If on your iPad and iPhone Home button doesn't work, maybe a little trick will save you! Take a 30-pin cord. First of all, insert the plug into the iPhone connector, then you need to put your finger under the plug and press it from bottom to top. If you are sure that you did everything correctly, try to check the operation of the device by first removing the cord.
P.S. Don’t get too carried away... it may turn out that in addition to the Home button, the dock connector will also stop working.
Method 3:
When the cause is wear and tear of the mechanism, WD-40 aerosol can help you. It is used in aviation and the aerospace industry. This spray is well known to car enthusiasts; it can also be used in the household, spraying squeaky doors, locks, etc.
But now we are talking about a completely different area of application of WD-40. To “reanimate” the Home button on your iPhone and iPad, you need to spray the button with an aerosol and make 10 quick clicks. It should help, let's check.
Method 4:
Have you tried all the above methods and they didn't help? This is bad, most likely you will have to turn to specialists! In the meantime, the built-in iOS feature will help you - software duplication of functions.
Do the following: Settings - General - Accessibility and turn on Assistive Touch by clicking the switch at the top of the screen! Then click the circle that appears on the screen and in the window that appears, click “Home”. After closing the settings, you can call this button at any time to return to the main screen!
This way, you can continue working with your Apple gadget before contacting specialists.
Many users begin to notice over time that the herd's Home key is slower to respond to touches, and sometimes even requires a double press. Over time, it may stop functioning completely. But few people know that the reasons may not be in the key itself, but in software failures.
If the Home button does not work for this reason, then just follow a few steps:
- Just restart your phone. The operating system must be freed from temporary files, support for all applications that are running and not turned off in time, etc. Sometimes this action is enough to restore the functionality of the Home key.
- If the Home button is stuck, you can try to calibrate it. To do this, launch an Apple application, for example, a weather forecast, after which you need to press the power key and hold it. When a red sign is visible on the screen prompting you to turn off the phone, simultaneously press and hold the Home key. The problem will be fixed if the problem was only a software glitch.
Why else doesn't the Home button work?
Much more often, the Home button on the iPhone does not work for more serious reasons. One of them is moisture getting inside the phone. It is enough to use the device 1-2 times in the rain or drop it in water for a few seconds, and the “Home” key begins to function worse and becomes stuck. The cause of the malfunction is oxidation of the contacts due to the onset of the corrosion process. The best way is to replace it at a service center. If for some reason you cannot do this, and the Home button on your iPhone does not work, you can use one of the repair methods.
Buy WD-40. This is an aerosol well known to motorists. You can use it to try to clear the key. The product needs to be sprayed onto the element, and then pressed on it several times through a napkin. The aerosol should remove traces of corrosion, as a result, performance will be restored for some time. However, such half-measures do not provide any guarantees, so the result of such actions may be insufficient. In addition, sometimes WD-40 flows under the glass, and in the end you have to change it too.
It happens that the Home button stops working due to a fall or a strong blow. In this case, it will not be possible to do without serious repairs, since the cables are most likely damaged. In this case, they will have to be completely replaced, and this requires the attention of specialists. Any independent repair will not solve the problem, and in the end you will still need to contact professionals, but their services will cost more after incompetent treatment.
What to do if the Home button stops working?
If the Home button does not work well, the most reliable solution is to contact. Specialists will first carry out a full diagnosis to find out the causes of the breakdown, and then fix it in the shortest possible time.
If you know exactly why the Home button does not work, indicate the reason when submitting a request, then the technician will be able to complete the repair faster. All services provided by our specialists are guaranteed, so you can be sure that everything will be done to a high level of quality. We undertake to correct any malfunctions, and whatever the reason that led to the breakdown, our specialists will quickly restore the device.
Hi all! Situations with phones are different and the most unexpected problems happen. One of the popular problems with iPhone or iPad is the breakdown of the Home button. What to do in this case? Is it possible to live without a Home button?
I’ll say right away that this article is a personal experience of working with an iPhone without a Home button. How did this happen? During this time, I foolishly (that’s right!) managed to break the cable that connected the motherboard and the Home button.
I ordered a replacement (for iPhone 6 and 6 Plus) for 100 rubles. In the meantime, she has to somehow live without the Home button. I’ll say right away that the iPhone turns on and works great, but upon startup, the system immediately notifies you that it is impossible to activate Touch ID.
If the Home button breaks down, I recommend contacting a service center. This is not banal. In my case, I know where and what I messed up and I know which cable I need to buy. But usually a problem with the Home button appears out of nowhere: a fall, water, etc.
Temporary Home Button Replacement
We go to:
Settings->General->Accessibility.
There we find the point:
Assistive Touch->Assistive Touch. Let's activate the option.
Now a virtual button appears on the screen (it can be moved).
We press it and the “Home” button is hidden inside. Now, instead of pressing the Home button, you need to make two clicks on the screen.
Double-clicking works in the same way - double-click on the virtual Home button and the multitasking menu opens.
Also, through Assistive Touch you can take screenshots (Device->More->Screenshot) and call Siri (just Siri).
If you take screenshots often, then go to:
Settings->Accessibility->AssistiveTouch->Top-level menu. Here you can add the desired “Screenshot” button. After this, you can take a screenshot in a couple of clicks.
Also in the settings you can completely simplify the interaction with the virtual button. Pay attention to the points:
- One touch - here I added the “Home” action
- Double tap – “open menu”, but you can also open multitasking.
- Long press - I put screenshots on it...
Good luck to all! Don't break your phone... :)