Open
Close

Disable Safe Mode. How to disable safe mode on Android: methods

When Safe Mode is activated on your phone, only factory apps can be used, and those downloaded from third-party sources stop functioning. Often it turns on without user intervention, which occurs due to damage to the operating system or various types of malfunctions of the gadget. Let's look at how to disable Android safe mode on your phone.

Safe mode is needed to protect the operating system. The fact is that third-party applications and programs often cause various malfunctions in its operation. The phone loads slowly, constantly lags, and the battery drains much faster than usual.

Quite often, when you enable safe mode, these problems disappear and the device’s functionality is restored. This suggests that the glitches are caused by applications downloaded by the user after purchasing the gadget.

In such a situation, it is necessary to detect the source of the problem and remove it. Only after this can the device be switched to normal operation.

On a note. Enabling safe mode does not always indicate any problems; sometimes it is activated during normal operation of the device and operating system.

Most often this occurs as a result of the volume control key sticking out. The cause of this problem may be that the cover is too tight.

How to understand that the option is enabled

The main sign that safe mode has been activated on the device is the stoppage of the resources downloaded by the user after purchasing the phone. At the same time, factory applications function without interruption.

However, other factors may also be the reason why third-party programs stop working, so you should pay attention to the lower left corner of the gadget’s screen. If Safe Mode is activated, an icon will be displayed there.

If there is no icon on the screen, but third-party applications still do not launch, it is worth checking the status of the phone. You need to do it this way:

  1. Unlock your device.
  2. Press and hold the power off button.
  3. When the menu window appears, see if the message “Go to safe mode” is displayed. If this does not happen, it means it is already turned on.

Below are the ways to turn off safe mode on your Android phone.

Disabling safe mode using Android

You can remove safe mode from the notification panel. To do this you need to act in this order:

  1. Unlock the gadget.
  2. Move your finger across the screen from top to bottom.
  3. Click on the inscription: “Safe mode activated.”
  4. Restart the device.

On a note. If the user was able to detect an application that caused the operating system to crash and enable safe mode, it can be deactivated by deleting the malicious resource and rebooting the device.

Using a combination of buttons

You can remove the gadget from safe mode by pressing certain buttons on the device. There are several ways to carry out this procedure.

Method 1: Home button. In order to restore the phone to its previous mode, you need to do the following:

  1. Unlock the gadget.
  2. Press the reset button.
  3. When the phone starts to boot, hold down the Home key.

On a note. Some mobile devices do not allow rebooting; in this case, you can simply turn off and then turn on the phone again.

Method 2: Volume control . To turn off safe mode this way, you need to do the following:

  1. Unlock the gadget.
  2. Click on the reboot command.
  3. While starting the phone, hold down the volume control.

Safe mode will be disabled regardless of how the key was pressed, increase or decrease. The main thing is to hold it until the gadget is completely loaded.

Through a return to factory settings

If one of the downloaded applications interferes with the normal operation of the device, but the user was unable to detect which of them was the problem, the best solution would be to reset the phone to factory settings. This can be done in the gadget settings by clicking on the appropriate command, or in this way:

  1. Turn off the phone and then turn it on again.
  2. During the boot process, hold down the Power and Volume Down buttons at the same time.
  3. When the menu appears, select the factory reset line using the volume key, and then activate the process with the power button.
  4. Confirm the action and wait for the reset to complete.

Attention! As a result of a “rollback” to the original settings, all data saved on the phone will be lost. Therefore, you should back up your data before performing the operation.

You can do this in your phone settings or transfer the necessary information to another device and then download it again.

Other ways to turn off safe mode in Android

There are other, easier ways to disable Safe Mode. To deactivate it, you can choose one of these options:

  1. Remove all downloaded applications. If the cause of the failure is one of these, after performing these steps, Safe Mode will be disabled.
  2. Reinstall the battery and SIM card. First you need to turn off the phone, then remove the battery and SIM card, wait at least 30 seconds and insert them back. After this, turn on the device again.

It is important to understand that, despite their simplicity, these methods are not always effective. If after carrying out the manipulations the safe mode is not disabled, you should resort to resetting the settings.

Possible complications

In rare cases, it happens that none of the described methods helps. Most likely, the reason for this is a malfunction in the firmware.

This problem occurs for various reasons, and only a specialist can deal with it. In such a situation, you should not continue experiments; it is better to seek professional help.

In most cases, when activating Safe Mode, the user can solve the problem on his own. The main thing is to adhere to the described algorithm of actions while it is turned off. And in order to prevent problems in the operation of the gadget in the future, it is worth installing a powerful antivirus program and avoid downloading programs and applications from unreliable sources.

Has your device stopped working normally? Safe Mode will help you fix this.

Navigation

Every more or less experienced computer user is aware that there is a special safe mode in the system, designed to fix problems. Android is no exception, but not everyone knows about its safe mode

Why do you need Safe Mode?

  • To begin with, it’s worth saying why Android’s safe mode might be useful at all. Everyone knows that Android is a democratic system in which you can do things that others cannot
  • Using downloaded programs or manually, you can change the appearance and operation of the system the way you need. But because of this, the operation of the device is sometimes disrupted, and this can be corrected using safe mode
  • When you launch it, only system applications will work for you, and you can get rid of unnecessary programs, and then log in in normal mode

How to enter safe mode?

  • To enter you need to: Press and hold the power button until the shutdown menu appears
    Select power off and hold your finger on it until this menu appears:

  • After the desktop appears, a message will appear in the lower corner that the phone or tablet is running in safe mode. Now you can do all the necessary actions or remove unnecessary applications. In addition, you will get the opportunity to see how Android will work without being burdened with unnecessary programs

  • To return everything to its place, reboot the device again. In some situations, difficulties arise, and the gadget turns on again in safe mode. To fix this, remove the battery for a moment and insert it back.

How to disable safe mode?

There are several ways to do this:

  • To deactivate, briefly unplug your device and remove the battery. After that, wait 30 seconds and put it back in place. After this, the device should boot in normal mode with all programs and the system itself running
  • This method is not universal, because today not every smartphone or tablet has a removable battery. This is especially true for many Chinese models. Therefore, this circumstance does not allow it to be applied to absolutely all devices.
  • devices. As soon as it starts loading, press the “Home” button and do not release until the gadget turns on completely
  • In some cases, the device simply does not have a reboot function. In this case, you just need to turn off the gadget and turn it on in the same way
  • For the third method, you need to turn off or restart the device. When starting, you need to press and hold the volume down button until the phone boots up completely
  • After completing these steps, you will be taken to the system part of the device, where you need to click “Wipe data / Factory Reset"
    You need to select using the shutdown button. Next, you will see a screen to confirm the deletion of all data from the smartphone, to which you should answer positively
  • After this, wait until all information is deleted from the gadget and reboot it in normal mode
  • For some models, instead of decreasing, you need to hold the volume up. It all depends on the device and operating version
  • In any case, at least one of the above methods will help you cope with disabling safe mode on your device, and then it will work normally again

Video: How to remove safe mode on Android OS?

Safe mode is available in most modern operating systems - Android, Windows, iOS, Linux, etc. It is needed so that the user can diagnose a problem with the operating system and fix it (if the problem is caused by installing an application).

About safe mode on Android

On Android devices, safe mode is “bare” Android, where the main functions of the operating system are available, as well as applications installed on the device by default, or downloaded from the Play Market from trusted developers. In this mode, the Internet connection also does not work.

You can enter safe mode in the following ways:


If everything is clear with entering safe mode, then the procedure for exiting it may have its own characteristics.

Method 1: Removing the battery

This method will not suit you if the design of the tablet or smartphone does not allow you to disassemble the case and carry out any manipulations inside it. It is also not recommended to use this method too often.

The instructions look like this:


Method 2: Reboot

The method is to reboot the device. When the Android or manufacturer logo appears, press the home button (in some models, the power button). After this, the device should boot into normal mode.

Method 3: Standard exit from safe mode

On most devices, you can exit safe mode in the same way as entering:


Using these methods, you can exit safe mode on your tablet at any time. If you cannot exit this mode completely, then you will have to reset the settings to factory settings. Fortunately, such problems practically never occur.

Safe Mode is a very useful thing that helps solve many problems. Firstly, if you have a performance problem, then this feature will help you a lot. Secondly, it helps if you have installed an application that slows down your device. And in general, if your system is clogged.

But this feature is often a hindrance, because disabling it is often more difficult than enabling it. In addition, it is possible that this option was turned on accidentally when it was not needed at all.

In this article we will tell you how to disable safe mode on Lenovo. If after following all our instructions you still do not see the result, then you need to go to the service center, because the problem may be in the firmware itself.

Before learning about ways to disable Safe Mode, it’s worth learning more about what it is.

Safe mode is a state of the device in which only system applications are running. This helps in cases where there is a problem with performance or autonomy. But if you don’t have such problems, then this feature will only hinder you, because it disables the functionality of all downloaded applications and even hides their icons.

In general, this option is used to remove unnecessary programs. Let's say you have a lot of garbage that slows down your smartphone's system so much that you simply cannot clean it. Then you just need to enable safe mode and delete everything unnecessary. But the main problem is not to enter, because the Lenovo phone enters safe mode very easily, but to return everything back.

Ways to disable safe mode on Lenovo phone

There are many ways to disable this mode, but it is far from certain that at least one of them will work.

The very first thing you can do is pull out the battery. This method is the least effective, since many smartphones have a monolithic body and a non-removable battery. But if you have a removable lid, then why not try it. Moreover, it does not harm the phone.

If such manipulation does not produce results, then you should try pressing the “” button when rebooting. Home».

If nothing happens, then the only correct option and the last chance is a factory reset. This is a very responsible procedure, because in this case you can get a “brick”. If you have not forgotten your gmail email or password, then you simply will not be able to unlock your smartphone. But Google has no technical support, only a collection of popular questions. Therefore, if you want to try this solution to the problem, then first make sure that you have access to your account, save all important data, and only then proceed.

If these methods do not answer your question about how to disable safe mode on Lenovo, then you need to go to a service center, because there are simply no other ways to disable safe mode. In addition, it is recommended to look at the main screen from time to time, as some phones automatically display messages asking you to remove safe mode.

Removing the Battery

Let's start with the simplest thing. If you are wondering how to turn off safe mode on a Lenovo tablet, then the first thing you should do is remove the battery. But not for long, just 30 seconds, and then you need to put it back and turn on the smartphone. This helps with a very low probability, but there are still cases when this is precisely the solution to the problem.

With smartphones everything is more complicated. In 2018, most phones have monolithic bodies, so this method of solving the problem is unlikely to suit you.

Using the " Home»

If the battery method did not help you, then you can try exiting safe mode using the " Home" In order to implement this method, you just need to reboot your smartphone and hold down the button under the screen while turning on the device. It is important that you hold the " Home until the end of the reboot.

If the question of how to remove safe mode on Lenovo remains open, then you can try similar methods that differ only in the buttons. Set the device to reboot in exactly the same way, only instead of the “ Home» Press the volume key down or up.

It turns out that you need to restart your smartphone 3 times. But you shouldn’t make too many attempts, because excessive reboots harm your device.

Hard Reset

If all of the above did not help you, then your last hope is to roll back the settings. This 100% works to disable Safe Mode.

This is a complex procedure for which it is worth preparing. First, you need to write down the password and login for your Google account, because, as practice shows, most users forget about it the next day after registering. If you do not remember this data, then you can get a “brick”. Secondly, you need to create a copy of all the data that is important to you. This could be some photographs, music, documents, etc.

After you have done all this, you should start resetting the settings. You can do this in two ways:

  1. You need to go to " Settings" and select the item " Factory reset" The smartphone will turn off, clean itself and display a new user registration window.
  2. Just turn off the smartphone and when turning it on, press the volume up and down keys + the “ button Home" " Recovery Mode» (« Engineering menu"). In it you need to select the line “ Wipe data/Factory Reset" Moving up and down is done with the volume up and down buttons, and selection is done with the " Turn on/off" After confirming the start of the process, wait until the phone or tablet system deletes everything, and restart the smartphone by clicking on the line with the word “ reboot" to boot the device normally.

If this does not help, then only flashing or a service center will help your device.

Video on how to turn off safe mode

After reading our instructions on how to disable Safe Mode on Lenovo, you have a rough idea of ​​how to do it. But it’s still better to watch the video instructions so as not to click anything unnecessary. The video shows all the ways you can exit safe mode. If none of these methods help you, then you need to go to a service center, because you yourself will not do anything if you do not have at least minimal experience in solving such problems.

Any complex and multifunctional device always has a function that launches a certain safe mode. This allows you to avoid critical errors in the operation of the system, and can even prevent breakdowns.

For example, the Windows operating system, when there is excessive load on the video card, displays a warning about changing the color scheme to a simplified one. And the kitchen multicooker simply turns off when it overheats.

A similar safe mode is also available in smartphones running the Android operating system. In our article we will tell you what this function is, how to enable and, most importantly, how to disable safe mode on Android if the system starts it automatically.

Why do you need safe mode on Android devices?

Over time, debris from numerous third-party applications accumulates on your Android phone, which negatively affects performance. Low-quality programs downloaded from third-party sources can harm system software and overload the device’s hardware. Such applications can also carry virus programs.

In such cases, safe mode on Android is launched: all applications except system ones are disabled, and only the main background processes continue to work.

How to enable safe mode

The user can switch to safe mode independently. You can do this using the Android settings:

● Press and hold the phone's power button

● Wait until the dialog box appears on the screen

● Press and hold the “Power off” command

● When the Safe Mode window appears, click OK


After the smartphone reboots, an indication will appear on the lock screen that the device is operating in safe mode. This can also be determined by application icons. Shortcuts to all third-party programs will be grayed out and inaccessible to the user.

In safe mode, you can completely clean your smartphone by deleting installed applications that are not used or are suspicious.

In addition to the standard function of putting the phone into safe mode, the user can use special applications available in the Google Play digital store. However, it is worth keeping in mind that such programs will definitely require root rights. And rooting a mobile device, in itself, can lead to extremely negative consequences.

How to turn off safe mode on Android

There are several ways to switch the device to the main operating mode.

Method 1: Reboot the system

The simplest method, which is tied to the shutdown dialog box. Just hold down the power key of your smartphone and select the reboot command in the window that appears.

Method 2: Remove the battery

This method will only work with devices that have a removable battery installed:

● Turn off your phone

● Remove the battery

● Wait about a minute

● Replace the battery and turn on the phone

Method 3: Through the Recovery menu

If the previous two methods did not work, the third remains - the most radical. You can disable safe mode through the engineering menu. In this case, all user information, account data and third-party applications will be deleted from the phone. The system will also roll back to system settings:

● Turn your phone off and on again

● On the Android logo loading screen, hold down the Power button and the volume down or up key

● Once in the Recovery menu, select the command Wipe data/Factory Reset

● Wait for the cleaning process to complete and select the Reboot command.

It is important to remember that system cleaning of a gadget only affects the internal memory of the device. All data stored on the SD card will remain unchanged. Therefore, if you decide to use such a harsh method of disabling safe mode, or a laptop, as well.

Tips for users

If you want to avoid possible difficulties in the operation of the operating system and, in principle, expect to never encounter the need to enable and disable safe mode, we recommend following simple rules:

● Don't download apps from suspicious sources

● Install a reliable antivirus program on your smartphone, which will cut out malware and start the process of cleaning the gadget from debris

● Choose for yourself a reliable and productive smartphone that will not let you down even under excessive loads

In our case, such a smartphone was Fly Cirrus 7, on which we tested how to remove safe mode on Android. It is worth noting that over several months of using this gadget, we have never encountered a situation where we needed to change the main mode of the operating system.

Why Fly

Over its 14-year history, the British company Fly has consistently guaranteed stable and productive operation of every mobile device produced. The high quality of Fly gadgets is due to the combination of an up-to-date operating system with high-tech optimized hardware. At the same time, Fly wins the trust of consumers with extremely attractive price tags for its smartphones.

Fly Cirrus 7 is also no exception to the tradition of producing excellent smartphones. The original Android without unnecessary upgrades and a powerful 4-core processor at 1.25 GHz ensure stable and smooth operation of the system interface and any applications. And if you are faced with the need for many hours of “spring cleaning” and a total check of all subsystems, you don’t have to think about recharging the gadget - a capacious 2600 mAh battery is responsible for long battery life.

You can find out more about the technical capabilities of the smartphone on the official website of the Fly company. Here, on the technical forum page, support specialists will answer any question related to the operation of the gadget.