On a separate computer that is not a member of any Active Directory (AD) or Windows NT domain as a member, the user can configure it in such a way that the operating system automatically will enter the console area or desktop immediately after booting (see how to do this). But, if the computers are members of a domain and are configured to log on to the domain, auto login feature can be configured using a graphical user interface (GUI). IN Windows XP and Vista, Users must enter a user name and password to use this computer hidden in the user account window on a domain system, even if the user belongs to the local user or has local administrator group privileges.

In the computer domain, Windows XP can still be installed automatic login in the selected user account by setting parameters in the registry.

Please note that the username and password credentials for automatic login will be saved and stored in the registry Windows, and can be read by anyone who can physically access the computer or remotely connect to the registry to check the user group. Hackers and intruders can also gain access to everything on the computer, including any network or network to which the computer is connected. Thus, Turn the auto login feature on or off into a system on a domain environment, a serious compromise in network security.

Follow the following procedures to force Windows XP to skip and bypass the prompt for the user to enter username and password:

1. Click the button Start, select Execute, enter regedit command and press the button OK. IN Windows Vista, just enter regedit command V Start – Search and press Enter .
2. Go to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

1. Double click DefaultUserName, enter username to login, and then click the button OK .

If the registry value DefaultUserName name is not found, create a new string value (REG_SZ) with the name value DefaultUserName.

1. Double click the entry DefaultPassword, enter the account password below the field Meaning and press the button OK .

If not DefaultPassword values, create a new parameter: subkey (REG_SZ) with DefaultPassword as the parameter name.

Note that if there is no line DefaultPassword, system automatically changes value AutoAdminLogon registry from 1 (true) to 0 (false) to turn off the automatic login feature

If DefaultDomainName does not exist, create a new String value (REG_SZ) registry key with the name value DefaultDomainName.

1. Double click AutoAdminLogon, in field Meaning put 1 and press the button OK.

If there is no AutoAdminLogon entry, create a new string entry (REG_SZ) with AutoAdminLogon as the parameter name.

1. If they exist, remove the key AutoLogonCount.
2. Close Registry Editor.
3. Click the button Start, select an item and press the button OK.

After restarting the computer and Windows XP, the systems start and you can login automatically to a user-defined or previously specified key in the registry.

Method 1.

Use Registry Editor to add credentials to the registry. To do this, follow these steps:

Click Start, click Run, type regedit at the command prompt, and then click OK.

Locate the following registry key:

Double-click the DefaultUserName option, enter your username, and click OK.

Double-click the DefaultPassword option, enter your password in the Value field, and click OK.

If the DefaultPassword parameter is missing, create it. To do this, follow these steps:

Specify the parameter name as DefaultPassword and press ENTER.

Double-click the created parameter and enter the password in the Value field.

Note. If the DefaultPassword registry entry does not exist, Windows XP will automatically change the value of the AutoAdminLogon registry key from 1 (true) to 0 (false). This will disable the AutoAdminLogon feature after you restart your computer.

Double-click AutoAdminLogon, enter 1 in the Value field, and click OK.

If the AutoAdminLogon parameter is missing, create it. To do this, follow these steps:

From the Registry Editor's Edit menu, select New and then String Value.

Set the parameter name to AutoAdminLogon and press ENTER.

Double-click the created parameter and enter the number 1 in the Value field.

Close Registry Editor.

Click the Start button and restart your computer.

After you restart your computer, you are automatically logged in.

To bypass the automatic logon procedure or log in as a different user, hold down the SHIFT key after you log off or restart Windows XP. This only changes the first login procedure. To apply the modified procedure in the future, the administrator must configure the following registry setting:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

Parameter:ForceAutoLogon
Type: REG_SZ
Data: 1

Method 2.

In Windows XP Home Edition and Windows XP Professional, on a computer that is not part of a domain, you can also enable automatic logon without editing the registry. To do this, follow these steps:

Click the Start button and select Run.

In the Open field, type control userpasswords2 and click OK.

Note. When you try to display Help in the User Accounts window in Windows XP Home Edition, Help does not appear. Additionally, you receive the following error message.

The help file drive:\Windows\System32\users.hlp cannot be found. Check if the file is on your hard drive. If the file is missing, reinstall it.

Clear the Require username and password check box, and then click Apply.

In the Automatic Login window, enter a password in the Password and Confirmation fields.

Click OK to close the Automatic Logon window, and then click OK again to close the User Accounts window.

» How to set up auto login in Windows XP?

How to set up auto login in Windows XP?

Setting up automatic login

Most personal computer users are faced with the task when, after starting Windows XP, they are given the opportunity to select a registered user and log in using a password. Undoubtedly, these actions are aimed at ensuring greater safety in using PCs, for example, in computer science classes at universities and schools, and accounting departments of enterprises; however, this condition sometimes interferes with home users.

So, let's look at the manipulations that are necessary to save the password and other information about setting up automatic login to Windows XP in the system registry.

A few words about safety

Please note that auto-login makes it possible to use Windows XP more comfortably. But, on the other hand, this entails a decrease in the degree of security of the system, and if someone gains physical access to your computer, there is a possibility of stealing passwords, installing spyware, becoming infected with viruses, as well as access to all registered networks and the file system! In addition, by making settings for autologin, the password will be stored unencrypted in the system registry, and the registry section will be accessible to a remote user who has passed the authentication. Taking this into account, you can use automatic login only if the system is completely secure and access to the system registry is blocked for users who do not have special privileges.

This article provides steps that provide instructions for modifying the registry. However, incorrect actions can lead to serious problems and the inability to start Windows XP. Therefore, you should edit registry keys very carefully, and to completely protect yourself, make a backup copy of it first. This will make it possible to restore the registry if problems occur. You can find out how to backup and restore the registry from it on the Microsoft website.

Enable the Welcome page when logging into Windows XP

In Windows XP operating systems for configuration automatic user login into the system without entering a password, first of all, you need to enable the welcome page:

• Click Start. Then - Control Panel. Next – User Accounts (if you don’t see this item, switch the viewing mode on the left).

• We move the cursor to Change user login.

• We put a checkbox in the item “Use the welcome page” (if this is not done, automatic login to Windows XP will not be possible).

• Click “Apply settings”.

Editing Registry Entries

• We launch the system registry editor using the Win + R key combination and enter regedit in the window that appears, press Enter.

• Next you need to find the branch: HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/WindowsNT/CurrentVersion/Winlogon

• Open the DefaultUserName parameter (here you need to enter the name of the user who should log in without entering a login and password).

• Then open the DefaultPassword string parameter and enter the user’s password (the “value” field). If this parameter is not detected, you need to create it (right-click Create and select String parameter called DefaultPassword, press Enter). It is worth considering that if the DefaultPassword parameter is not specified, the system will automatically set the value of the AutoAdminLogon registry key to 0, and this will disable the ability to log in automatically.

• Open the AutoAdminLogon parameter and change the value from 0 to 1. If the AutoAdminLogon parameter is missing, you need to create it yourself (similar to creating the DefaultPassword parameter, but with a value of 1).

• Close the system registry editor and restart the computer.

Cancel automatic login

To bypass the automatic logon process, you must hold down the Shift key after Windows XP restarts or after the user logs out. Then, in order to use automatic login to the operating system, you need to configure the ForceUnlockLogon registry parameter with an administrator account using the already familiar regedit command. Registry branch:

HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/WindowsNT/CurrentVersion/Winlogon

Type: REG_SZ
Data: 1

Note:

If Windows XP previously logged the user in automatically and then stopped, check the following:

• Is there really a single user with a missing password?
• Has anyone disabled the system welcome screen?

That's all - the automatic login to Windows XP is configured.

This article will discuss how to set up autologin (automatic login without entering a password) on Windows operating systems. This can be useful when there is no need to restrict access to a computer/laptop so as not to waste time entering a password every time you turn it on.

One of the easiest ways, using standard Windows tools, is to use the command control userpasswords2. This is done as follows:

Click Start - Run (or Win+R keys), and in the window that appears, enter control userpasswords2 , then click OK.

In the window that appears, uncheck the “Require username and password” checkbox and click OK.

In the window that appears, you will be required to enter your username and password.

After entering, you can click OK. Now, when you turn on your computer, you will automatically log in as the user you need.

Using Autologon

Another simple method for setting up automatic login to the system is to use a third-party program Autologon, authored by Mark Russinovich. You can download it from the Microsoft website.

Using the program is as simple as possible - you need to run the downloaded program (no installation required, but upon first launch you will have to accept the terms of use), and enter all the data you need.

In field Username you should write the user name; if the user belongs to an Active Directory domain, then you should indicate his name in the field Domain. And finally in the field Password you must enter your password. After that, to turn it on, you just need to press the " Enable", and after that auto login will be configured.

The utility saves the password to the registry in encrypted form, so you won’t be able to view it in the registry after installing autologin.

Setting up via the registry

There is also a way to configure automatic login through the registry.

To enable autologin in the registry, you need to open the Start menu and select Run (or press the Win+R key combination). In the window that appears, type regedit and click OK.

Hint: in order to change the value of a parameter, just double-click on it, or right-click and select " Change".

AutoAdminLogon - We set it to one, otherwise the automatic login will not work.
ForceAutoLogon - If we want the user to be “forcibly” logged back into the system, then we set it to one.
DefaultUserName - The username under which we want to automatically log in.
DefaultPassword - Password of the user under which we want to automatically log in. Most likely, this parameter will not be available, and therefore you will have to create it yourself. To do this, right-click on an empty space and select New - String Parameter, and give it a name DefaultPassword.

DefaultDomainName - The user domain under which we want to automatically log in. If the domain is not used, leave it empty.

Now you can close the registry editor and try to restart your computer. If you did everything correctly, then immediately after loading the operating system, you will automatically log in under the desired user.

Passwords exist to restrict access to information to unwanted users. But, probably, many have found themselves in a situation where you set a seemingly simple password (for example, to restrict access to files for children), and then forget it. Accordingly, it is impossible to log into the system without a password. The first thing that arises is the idea of ​​urgently reinstalling the operating system. But there are other options. If you have Windows XP, use the following methods.

You will need

• Computer running Windows XP operating system, screwdriver.

Instructions