Samsung scx 3400 won't print. Print Samsung SCX series report page. Printer paper sticks together

Seal _ 72

Color adjustment

If there are color differences between the screen images

computer and use the resulting print to adjust the following

settings like color contrast or color level.
The printer driver allows you to make print settings for

various needs.
1.

Open the window Printing settings(see section "Access to

2. Open the tab Graphic arts. For information about

print options in the menu Printing settings talk to

online manual.

Color Mode: possible as color printing ( Color), So

and grayscale printing ( Shades of Gray). Meaning Color

usually achieves the best print quality

color images. To print a color image in

grayscale select value Shades of Gray.

Black Optimization allows you to improve quality

black print. Using this feature

may slow down printing speed.

To adjust the color manually, press the button

Additionally on the menu Color mode. To adjust

print colors move the slider on the tab Levels or

select tab Equalization to calculate the correction

colors by the print driver.

Additionally: to set additional

parameters, click the button Additionally. (Only

PCL driver)

Font and text: select option Darken text,

to make the text darker. For black and white printing

use the parameter Print all text in black.

Raster compression: determines the degree of compression

images to transfer them from the computer to the printer.

If you set it to Maximum,

The printing speed will increase, but its quality will decrease. (Only

PCL driver)

Graphics controller: this function is intended

for clearer display of font edges and fine

lines, which improves the readability of the text, as well as

synchronization of color channels when printing in color

Grayscale Enhancement: enhancement function

shades of gray ensures details are captured on

photographs and improving contrast and

readability of color documents printed in

grayscale mode. (PCL driver only)

Clear Edges: This function is intended for more

clear display of font edges and fine lines, which

improves text readability.

Toner saving: This function allows you to extend the period

cartridge service and reduce the cost of printing one

pages. However, the print quality is not significantly

decreases.

To reduce toner consumption, move the slider away from

values No saving to value Max. quantity

save.

3. Press the button OK or Seal while the window Seal Not

will close.

Adjusting print clarity and smoothness

Screen Options

This feature affects the resolution and clarity of color printing.

There are three modes: Standard., Improved And

Detailed.
1. To change print settings from an application,

Open the window Printing settings(see section "Access to

2. On the tab Graphic arts select item Additionally In chapter

Color mode.

3. Open the tab Equalization.
4. Set the desired options in the menu Screen.

Default settings: mode settings are applied

Screen.

Ordinary: When you select this mode, print on the page

will be smoothed out.

Improved: when this mode is selected, the text on

the printed page will be clear and the images and

photographs are smoothed.

Detailed: when selecting this mode, all details on

The page will be printed clearly.

5. Click the button OK.

Changing default print settings

Most Windows applications can cancel

printer driver settings. First set the settings to

application, and then other settings in the print driver.

1. On Windows, open the menu Start.
2. On Windows 2000, select

Settings > Printers.

On Windows XP/Server 2003, select Printers and

faxes.

On Windows Server 2008/Vista, sequentially

select items Control Panel > Equipment and sound

> Printers.

In Windows 7, select sequentially Panel

management > Devices and Printers.

On Windows Server 2008 R2, select

points Control Panel > Equipment and sound >

Devices and Printers.

3. Right-click on the device.
4. On Windows XP/Server 2003/Server 2008/Vista, select the command

Printing settings.
On Windows 7 and Windows Server 2008 R2, select

menu item Printing settings.

If available near the location Printing settings icon

arrows ( ) you can select a different driver for this

printer.

5. Set the options you want on each tab.
6. Click the button OK.

You can change settings for all print jobs in the window

Printing settings.

This page describes information about the ability to print a configuration page for Samsung SCX series printers and MFPs from the control panel. These reports contain information about the firmware, serial number, network settings, remaining consumables, etc.

Samsung SCX-3200/3205

— Configuration report:

Samsung SCX— 3205W

In standby mode, press the “STOP” key and hold for about 2 seconds. This will print a printer configuration report.

If you need a report on network settings, hold down the “STOP” key for about 4 seconds.

If you hold down the familiar key for 6 seconds or more, a report on the status of consumables will be printed. Where can you find out the balance on the chip.

If the printer is blocked due to the end of the cartridge's life, then reports cannot be printed until you insert a new cartridge, or until you change the chip to a working one.

Samsung SCX-3400/3405/3407

There are two ways to print the report.

— Configuration report:

Press the “STOP” key in standby mode and hold it for no more than 3 seconds, release it after the indicator flashes.

— Report on the status of consumables:

If you need to find out the balance on the chip and other parameters of consumables, press and hold the “STOP” key for more than 4 seconds.

Relatively quickly press the buttons on the control panel in the following order: “+” “+” “STOP” “-” “-” “STOP” “STOP”. The code “UC” should appear on the display, now press the “+” button until the code “AA” appears on the screen. Now press “START”, the printer will print several pages with a configuration report and the status of consumables.

Samsung SCX-3400F/3405 F/3405 FW

Press the menu button 3 times, after which you will see “System Setup” on the screen, press “OK”.

Use the Left and Right buttons to find the Report section and click OK. Next, select the report you need and confirm with the “OK” button.

Second way:

Press the keys in the sequence MENU - # - 1934 - MENU, then select TECH MENU, in which you will find the REPORT section. Here select ALL REPORT and confirm with “OK”. All reports will print.

Samsung SCX-4200/4220

In Idle mode, press the Menu key until “Report” appears. By clicking on “OK” you will see the line “System data”, after which you confirm printing with the same button.

Samsung SCX-4300

To print a report on this MFP, press the “Menu” button 8 times. The display will show “Report...”; all that remains is to confirm printing with the “OK” key.

Samsung SCX-4600/4623x/482xFN/4833x

Make sure the printer is turned on and in standby mode. Press the “Menu” button 3 times, after which you will see the line “System Settings” on the screen, click “OK”.

Use the keys to get to the “Reports” section and enter it with “OK”. Here, select the report you need and confirm with the same “OK” button.

Samsung SCX-4650/4650N/4655FN

Samsung SCX-4727x/4728x/4729x

In standby mode, press “Menu” and select “System Settings”. Next, find the “Reports” section. Here, select "Configuration" or "Supplies Information" and confirm printing.

You can print the report using the second method.

Press the key combination Menu - # - 193 - #. Next, find the “Report” section, then select “All Report”. In this case, both reports will be printed.

Print Samsung SCX Series Report Page updated: August 9, 2017 by: admin

A fairly common problem among users of the Samsung SCX-3400 printer is the situation when the printer does not print. Previously printing normally or installed for the first time, it doesn’t matter - from this article you will learn the causes of the malfunction and simple tips for eliminating it.

Why doesn't Samsung SCX-3400 print?

There is a paper jam in the printer

Typically, if a printer gets a paper jam, it will stop printing. At the same time, the lights and indicators begin to blink. At the same time, you can see the corresponding error message on the monitor screen, as well as suggestions for troubleshooting. To fix the problem, follow the on-screen instructions.

Before you do this. If there is a paper jam in the printer, a simple reboot will help. Not a computer. Unplug the printer, wait a few seconds, and plug it back in. Not always, but sometimes this is enough for the printer to work. The printer and all its elements will restart. The jammed paper will come out on its own.

If the method does not help, for example, too much paper is stuck, use the assistant’s advice on the monitor screen. But the kind of advisor who can help solve the problem with jammed paper does not always appear. For example, special printer diagnostic software is not installed on the computer. Therefore, if there are no notifications, remove the jammed sheets yourself. Open the printer cover, as well as all other parts that allow paper to come out freely. There is no need to completely disassemble the device.

Gently remove the sheet or sheets from the printer. When removing paper, be careful not to pull with force to avoid tearing it off. In the worst case, if the sheet accidentally breaks, a piece of paper remains in the printer, carefully use tweezers or a similar tool to grab the edge and pull it towards you. In any case, until the paper is completely removed, the printer will not print. And even if it does, it becomes unsafe in terms of possible failure of important elements of the printer.

Paper jam in printer

A similar situation, a message like “Paper jam in the printer” is displayed on the monitor screen. Printing pauses until the paper is removed. Remove the paper from the printer.

The difference between this problem and the previous one is that, if in the first case the paper can still be somehow removed without disassembling the printer, then in the second, it jams, breaks, curls to such an extent that even manually it is not always possible to remove it from there .

How do I remove paper from the printer?

To remove paper from the Samsung SCX-3400 printer, open the printer cover, as well as all closing elements that allow paper to exit. Using caution, remove it using gentle movements. There is no need to pull out sharply - you can tear off most of the sheet. In this case, it will be much more difficult to remove the remains.

But it often happens that they still tear off. They grabbed one end and pulled. As soon as the paper starts to move, they pull harder. As a result, the sheet comes off, leaving paper residue in the printer. If this happens, use tweezers or another similar tool, grab the edge of the sheet and slowly pull until it comes out completely.

Is your Samsung printer jamming paper?

Let's look at the reasons why jams actually occur. Why does Samsung SCX-3400 chew paper?

The paper in the printer is magnetic

Often this problem occurs with sheets that have been put through a laser printer and have received some electrostatic charge.

For example, you need to print a document on both sides of the sheet - do double-sided printing. Over time, the electrified sheets become magnetic to each other. To avoid this, take a stack of printed sheets, flip through them all, tap the edge on a hard surface, wait a while and start printing again.

If you often have to deal with double-sided printing, then a regular antistatic agent, which is used for clothing, will help.

Printer paper sticks together

If a certain number of sheets have been printed, the printing element heats up, causing the sheets of paper to heat up. If you continue printing on the reverse sides of the same sheets, they will stick together. Flipping and tapping will help correct the situation. Moreover, when you leaf through the sheets, to be sure, place the stack on the table and pull one sheet. If another one is following it, it means the sheets are sticking together and it is too early to continue printing. Go through the entire stack again. Blow on them, shake them...

If you load too much paper into the tray, the printer may accidentally pick up several sheets, causing them to not pass through the print element and getting stuck as if stuck together. Restarting the printer will help.

Bad printer paper

Is it even worth talking about? After all, the user knows what he is getting into when he inserts old, wrinkled sheets into the printer in the hope of getting a normal document. And why? Of course, if the importance of such a document is indifferent, then you can print whatever you want.

On the other hand, if you need to test the printer by turning on test printing, it is more advisable to insert already used sheets - drafts. Why not? Still, the best advice would be to limit such printing techniques so as not to subsequently break the printer due to some unsuccessful attempt to remove the paper from the printer.

The paper is not suitable for the printer

Another option, also quite common. There are different paper formats, different quality, size, weight. If the printer jams paper, perhaps you are using the wrong paper!? Too thin or vice versa. Check and replace if necessary.

The paper was inserted unevenly into the printer

We accidentally placed the sheets unevenly in the tray and the printer also failed to pick it up. It happens that the printer itself grips the paper unevenly. Perhaps he was just tired!? Cool the printer and let it rest. The printer may not pick up paper at all. Make sure the sheets are stacked correctly.

The printer cover is open

If the lid of any printer, including the Samsung SCX-3400, is open or not closed tightly, the printer will not print. Sometimes even a micro-hole in the lid can cause the printer to stop printing. The reason may be failure of the closing element or locking devices. And therefore, while any of the covers is open, the printer does not print.

In order to correct the situation, check all doors, lids and other closing elements.

Samsung printer driver crashed

You can find current drivers and other software on the manufacturer’s website. Use only official resources and always check what you download from the Internet.

Use programs that will prepare your computer to interact with the printing device. Update your drivers.