How to delete an unallocated volume. How to delete hard drive partitions

There are various situations in which you may need to merge disk partitions. For example, you bought a used computer or just a hard drive, but the partition doesn’t suit you, or you made partitions on a new computer, the sizes of which you decided to change. You can merge them and re-partition. This operation can be done in different ways.

Method 1. To merge disk partitions, you can use Windows OS tools, without installing any additional programs. In the “Disk Defragmentation” settings, set the method to “Manual”, otherwise an attempt to delete a partition will end in an error. Perform a series of actions: “Start” - “Accessories” - “Run”, then in the service line type “diskmgmt.msc” - the name of the disk management service. Press the Enter key. The window that opens will list the names of the available disk partitions. Select the name of the volume to be deleted. For example, of two partitions of volume C and D, only C should be left - on drive D, right-click and select “Delete volume...”. First copy all the information from the disk partition you are deleting (D) to external media, because now a notification will appear on the screen stating that the data on the disk will be lost. You must agree if you want to combine sections. Free disk space will appear, which can be used to increase the capacity of another disk. This area of ​​the disk is not yet partitioned and is highlighted in black in Disk Management Manager. You can create a new section in it or attach it to an existing section.

On drive C, right-click and select “Extend volume...” from the menu. In the next window, you need to indicate in the list of partitions the one through which drive C is being enlarged. In our example, there is only one, and therefore partition D will be silently selected. The system will display all the information on merging partitions, click the “Finish” button. Disk C will now be one and its size will be increased. All information on drive C remained unchanged.

Method 2: Log in as an administrator. At the command prompt, type “diskpart” and press Enter. The utility built into Windows will launch, which is used to manage local disks and their partitions. Complete each command by pressing the Enter key. Now type “list volume”. A list of all volumes with assigned numbers will appear on the screen.

Type the command “select volume X” - instead of “X”, specify the number of the partition to be deleted. You have thus chosen the volume with which further manipulations will be performed. Type "delete volume". Please note that all data from the specified partition will be irretrievably lost. You cannot undo a completed delete operation.

If for some reason the volume is not deleted after entering the command, try deleting the disk partition using the “delete volume override” command. Exit the DiskPart service and close the Command Prompt window.

Method 3: Delete a hard drive partition using the Partition Magic program. Download from the Internet and install the specified software. Then restart your computer. Run the program for execution. In the Quick Launch Menu, set it to Advanced Mode.

Mark the partition to be deleted. Be extremely careful not to accidentally delete necessary information. In the open window, check again the name of the partition to be deleted, enter the volume label in the “Please enter the volume label...” field. Click the "Yes" button to confirm the deletion. In the list of partitions, this volume will have the “Unpartitioned” type.

Select "Changes" in the main menu of the program, then "Apply changes" in the next window. Click the "Yes" button to confirm your decision. During the process of deleting the partition, the system will reboot several times. Partition Magic will then launch automatically. The area of ​​the deleted disk partition will be marked in the program window on the “List of Partitions” tab – “Not marked”, the selected partition is deleted.

You can delete a disk partition without installing additional programs in Windows 7. You cannot delete a partition with an operating system or other system files (for example, paging files) installed on it in this way. If the Windows XP version is installed, then you need to use special programs for working with disks.

A section break is a non-printing and hidden sign that indicates to the Word text editor that you need to end the current section of the document and move on to a new one. Users typically insert section breaks when they want to apply different formatting to different parts of a document.

But, if you have not encountered a section break before, it can create problems for you when editing text. In this article we will talk about how to remove a section break in the Word text editor. The material will be relevant for all modern versions of the Word editor, including Word 2003, 2007, 2010, 2013 and 2016.

If you need to remove a section break, this is done very simply. First, you need to activate the display of non-printing characters; this will allow you to see breaks as regular characters and make them easier to delete.

If you are using Word 2007, 2010, 2013 or 2016, then you need to go to the “Home” tab and click on the “ Show all characters" In the screenshot below this button is marked with an arrow. You can also enable the display of non-printable characters from the keyboard; for this, use the key combination CTRL+SHIFT+8.

If you are using Word 2003, then the button to enable the display of non-printing characters is simply on the toolbar, next to the page scale. In the screenshot below this button is marked with an arrow.

After enabling this function, all non-printable characters will begin to be shown on the page. Now you need to go to the section break you want to delete and place your cursor in front of it. The screenshot below shows roughly what it should look like. After the cursor is positioned before the section break, simply press the DELETE button on the keyboard and thus delete it.

There may also be page breaks in Word documents. If you need, then this is done in the same way as with a section break.

First you need to enable the display of non-printable characters, then place the cursor before the page break and delete it using the DELETE button.

The use of breaks is especially popular among those who often create large documents in a word processor that have sections, subsections, and subparagraphs. Indeed, in this case, using such a Word function is very convenient and greatly simplifies the user’s work. However, it often happens that page breaks are unnecessary, which is why in our article we will examine the question of how to remove section breaks in Word.

In order to understand that it is page breaks that are placed in the document, the user needs to reflect hidden non-printable characters in the document. To do this, go to the “Home” tab, then in the “Paragraph” group click on the “Display all characters” button. What it looks like is shown in the figure below.

When working in Word, it is important to remember that breaks can be placed either automatically or manually. In this case, the user will not be able to delete breaks created by the program, but breaks created manually can be deleted. How? Read below.

How to prevent unwanted page breaks?

First, let’s look at this issue using the example of the 2013 Word program. To prevent page breaks, place the cursor before the paragraph to which you want to apply the settings. Then open the “Page Section” tab and open the “Paragraph” window, which we have written about several times above. Then open “Line and Page Breaks”. We fulfill the necessary conditions:

1. Check the box next to “Prohibit dangling lines” if you want each part of the page to have 2 paragraph lines.
2. If you want to prohibit a break between paragraphs, then check “Keep from next”.
3. To prohibit placing a break in the center of a paragraph, the user must check the box next to the item that says prohibiting paragraph breaks.

How to remove section breaks in Word?

To remove manual page breaks in Word, click on the “Draft” section. Next, select “Page Break” by clicking on the border next to the dotted line. After this, press the “DELETE” key located on the keyboard.

How to remove gaps in a large document?

This method is especially suitable for documents consisting of several tens or hundreds of pages. The user is invited to use the autocorrect function available in Word. How can I do that?

When copying or editing articles and works, Word users are faced with the fact that the text (new chapter or paragraph) begins on the next page. Meanwhile, either for the purpose of economical printing, or for the use of some fragments of this document, such design turns out to be inappropriate and undesirable.

This article is devoted to how to remove page breaks in Word.

What is a page break

A page break in Word 2010 is a non-printing character, such as a space, end of paragraph, or tab. This is a command sign. After it, all subsequent text will be located only on the next page. This opportunity is used when the idea of ​​document layout assumes that each section begins on a new sheet. Often, instead of page breaks, repeated paragraph marks are mistakenly used for this purpose, but this is very inconvenient. With this solution, after changing the volume of the section, the initial lines of all subsequent sections will “move”, that is, they will either start from the middle of the next page, or continue the already filled one, but after some distance. This is absolutely natural, since a large number of spaces only determines the distance between lines. They do not give the command to start a new page.

A similar sign is a line break. It is used when it is necessary that all subsequent text be printed on a different line, without starting a new paragraph.

There are several ways to remove page breaks in Word. It is advisable to use them depending on the volume of the document, how many deletions are expected in it and what their purpose is, etc.

First way

You can remove a page break in Word by simply placing the cursor at the end of the very last line after which the break begins, and pressing the Delete key. You may have to press it several times, since there may be duplicate spaces or paragraphs after the last character you type (usually a period or other end-of-sentence character). However, eventually they will all be deleted, followed by the page break. Most often this happens after the second or third key press. This will be noticeable when the text from the next page moves to the current one and, most likely, continues the paragraph. Then just separate it by pressing the Enter key.

This method is suitable for working with small documents and single breaks.

Second way

The second way to remove page breaks in Word is to remove characters in a controlled manner.

Click the "Show All Characters" button and you will see all the page breaks in the document. Scrolling down, select them and press Enter or Delete, depending on how the text is formatted, so that either the break is replaced with the end of the paragraph or simply deleted.

This method is indispensable if you need to remove only part of the breaks. Let's say it is necessary that chapters begin on a new page, and paragraphs continue on the previous ones.

It can also be used if you are working with a medium-length document.

Third way

The third method is to automatically remove absolutely all page breaks in the document or replace them with a paragraph mark or a space (depending on your goals). To do this, use the Find and Replace window.

Place the cursor at the beginning of the text and press the Ctrl and F keys. A search and replace window will appear. Click on the "Replace" tab. Next, click on the “More” button. Additional settings and options will open. Place your cursor in the "Find" field. Find the “Special” button and in the drop-down list, click on the “Page Break” line.

Place the cursor in the "Replace" field. If you just need to remove breaks, don't type anything on this line. If you need to replace them with spaces, type a space (with a regular key, as you do when working with text). If you want all sections to be replaced with the beginning of paragraphs, click on the "Special" button and select the appropriate line.

After that, click on the “Replace All” button. The operation is completed. The program will provide a report on how many replacements have been made. All page breaks have been removed.

This method is suitable for working with voluminous documents or with texts where page breaks are inserted erroneously and haphazardly. This happens, for example, when copying materials from a browser with complex layout.

Combining different methods

How can I remove page breaks in Word? Use the second and third methods together. Let's say you have a very large document, but you would like not all sections to be deleted. Repeat the preparation for automatic replacement, but instead of the “Replace All” button, click “Find Next”. If the page break that the program shows you needs to be deleted, click “Replace”; if not, then instruct Word to look for the next character. This will speed up the work significantly.

In addition to a page break, a section break mark can also be used in a document. It can be removed in a similar way.

When working with documents made in MS Word, you may notice that the text in some of them is divided. This is very convenient, since you can apply a separate text style to each fragment, create columns, number the pages of one part separately from the entire document, and so on. At the same time, by formatting it, you do not change the text in other parts in any way. You can read more about creating sections in Word in the article by following the link.

But it also happens that it is necessary to combine two parts of a document into one. This is not at all difficult to do, and in this article we will figure out how to remove sections in Word. These recommendations are suitable if you have Word 2007, 2010, 2013 or 2016 installed.

Before we start deleting, let's make it clear in which parts of the document they are located. To do this, you need to enable the display of non-printable characters. Go to the “Home” tab and in the “Paragraph” group, click the button.

You can now see various symbols in the document that were not displayed before.

For example, let's take these two paragraphs. Place italics at the end of the first one so that it flashes to the right of the paragraph symbol, and then press “Delete” on your keyboard.

The section break will be removed. To remove extra lines between parts of the text, click the mouse at the end of the first paragraph and press “Delete” the required number of times - in the example 3 times.

Now let's remove another break that is placed on the current page. Place italics at the end of the first part and press Delete.

Please note that after you remove the separation, the same formatting as the second paragraph will be applied to the first paragraph. Let's consider this example: in the second fragment, the material is divided into columns, and the margins on the right and left are reduced.

After removing the page break, the first one will also be divided into columns and the margins on the right and left will be the same as in the second.

If you have a certain style applied to your writing, then you can make a merger in such a way that the style of the first part is applied to the second.

Place italics at the end of the first paragraph and press “Delete” as many times as necessary. In the example, I pressed it 2 times.

As a result, the gap was removed, the text style in the second paragraph is the same as in the first, but the division of the material into columns was applied to the first.

If you need to remove this inscription so that the style of the second paragraph does not change, then in the line with the inscription, place the cursor on the right side of the character at the beginning of the paragraph and press “Delete” once.

The style of the second paragraph will not change, but the first will be divided into columns.

I think everything is clear to you. The main thing when deleting assigned partitions is not to forget that the formatting of the section that is lower is applied to the one that is higher.

Rate this article: