Connecting a microphone and setting up voice communication in Counter Strike. Why the microphone does not work in cs go How to hear your voice in cs
A microphone in CS 1.6 is not a particularly necessary thing, but sometimes you just want to chat with both allies and enemies. The only problem is setting up the device correctly so that all parties can communicate normally. In general, to understand how to set up a microphone in CS 1.6 quite simple.
Setting up a microphone in the game client
By default, the microphone is turned off, so first you will have to do the following:- Launch CS 1.6.
- Go to "Settings".
- Open tab "Voice".
- Check the box "Enable voice in game".
Setting up a microphone via the console
This method is quite convenient, since you can log into a single game or a local server, and then directly monitor all changes. In addition, a wider range of options is available here. Here is a set of commands for configuration:- voice_enable 1- enables or disables voice in the client;
- voice_maxgain 3- voice smoothing, you can set it from 1 to 5, you need to experiment and look for a comfortable value depending on the type of voice and microphone;
- voice_overdrive 2- the level of muffling of external sounds, such as shooting or footsteps, when someone starts talking, here the comfortable value is in the range from 1 to 2;
- voice_overdrivefadetime 0.4- determines how long in seconds the effect of attenuation of ambient sounds will work;
- voice_scale 0.75- regulates speech, this parameter has a maximum value of 1, the default is 0.75;
- voice_avggain 0.8- removes “noise”, preferably set within 0.1 or 0.5;
- voice_fadeouttime 0.1- sets the voice decay time in seconds;
- voice_loopback 1- turns on playback.
- Team sv_voicequality has 5 possible values that determine voice quality:
- 1 - 2,400 bps.
- 2 - 6,000 bps.
- 3 - 8,000 bps.
- 4 - 11,200 bps.
- 5 - 15,200 bps.
cl_updaterate 100.
cl_cmdrate 100.
rate 25000.
How to speak into a microphone in CS 1.6
This completes the setup. You can safely go to some server and start communicating. It is worth remembering that the default key for conversation is K, and must be held down as long as the user speaks.What to do if the microphone does not work in CS 1.6
Sometimes there are problems with the microphone. Even if they haven’t happened yet, this doesn’t mean that everything will be fine in the future, so it’s worth familiarizing yourself with the basic tips.Reinstallation
The very first thing is to reinstall the CS 1.6 client
The simplest and most obvious option. If the microphone does not work or there is some sound distortion, it is quite possible that the main problem is hidden in an incorrectly installed client or build bugs.
To check this, you need to install without any mods. This is the only way to determine where exactly the problem is hidden.
Checking the device connection
It is likely that the microphone is connected to the wrong jack. Most devices have a Mini-Jack connector. On connectors it is indicated by pink color.
If the microphone is working through a USB port, the problem may be in the jack. To solve the problem, you should try to connect the device to one of the sockets in the back of the case.
Driver Update
Having the latest version of the driver is the main guarantee of the functionality of the microphone and sound card. You can download drivers on the manufacturer’s official website, or you can use special software that allows you to automate this process, like Driver Booster.
Program conflict
Sometimes some programs can conflict with each other, constantly intercepting control of the microphone. In the case of CS, before starting the game you should make sure that programs like Skype, Team Speak, Raidcall and similar are turned off, since they automatically intercept the signal from the microphone and as a result the microphone in the CS itself will not work.
Windows settings glitch
In some cases, the microphone may not work due to the fact that the system could not recognize it correctly, or it was assigned incorrect settings. To check them, you need to open the volume icon in the system tray with the right mouse button, and then select “Playback devices”. A window will open showing the devices connected to the computer and their status. Alternatively, you can set headphones or something else as the default device, and then switch to the microphone.
Counter Strike is a computer game that continues to be popular among gamers for more than one year. For a more comfortable game experience, personal computer users may have a question: “How to set up a microphone in the CS?” At the same time, you want to perform all the necessary actions so that you can speak without crackling, hissing and other interference.
If you don’t know about CS, then, accordingly, you lose a number of advantages provided by various versions of the computer game Counter Strike. Why, exactly, is a microphone needed in this game? In order to be able to communicate with members of your team, exchange useful game information with them, which can help in achieving victory over the enemy team.
In this article, we tried to explain how you can configure the microphone in the CS for those users who are not satisfied with the default settings. What could be the reasons for the lack of sound on your part, why your colleagues and playing partners can’t hear you?
It is quite possible that you do not know in the CS where it should be connected and the like. But you may not be heard due to the occurrence of noise, crackling, hissing when you try to speak into the microphone. Let's talk about these things more specifically. Some personal computer users, playing KS (Counter Strike), may simply not know how exactly to communicate using a microphone.
Someone may not even have an idea of what needs to be done, where exactly, for example, to insert the plug and which button to press in order for the voice to be transmitted over the Internet. If, when asking the question of how to set up a microphone in a CS, a PC user implies that he does not know where to insert the microphone wire plug, then everything is simple here. Usually the above plug is inserted into a microphone jack, which is most often pink.
After all, you probably already have your personal computer speaker plug connected somewhere. So the microphone socket is located somewhere in the immediate vicinity and, as mentioned above, it is most likely made of pink plastic. Microphone and headphone jacks are often located on the side of many modern keyboards. At the same time, you can see a microphone icon on the keyboard itself.
How to set up the microphone in the CS in order to start a conversation? First, turn on the microphone itself by moving the slider to the “ON” position or pressing its corresponding button. Then you should use the keyboard by pressing the "K" English key to launch the sound from the microphone directly into the Counter Strike game. This key is provided by default, but some gamers (players), for greater comfort in the game and convenience, change the inclusion of the microphone for talking in the CS to the “V” key (voice in English means voice) or the “Alt” key.
Other players prefer to configure the inclusion of conversation in the game using the spacebar, which is also done by reconfiguring. Well, how to set up the microphone in the CS, that is, how exactly can you reassign a key in order to achieve convenience in the gameplay? For example, you need to go to game options, that is, settings. Then you select the "Keyboard" submenu and there make the necessary changes in the "Voice" item. There is another method that involves writing a special command. It is perhaps suitable for more advanced users - PC users who have started playing Counter Strike not for the first time.
Another useful recommendation for potential CS players exchanging information with other team members: do not shout into the microphone! Try not to speak too emotionally, neutrally and clearly pronouncing the necessary phrases. To remove unnecessary noise, try moving the microphone further away from your mouth when speaking. Sometimes installing a “native” driver from the manufacturer of your microphone also helps.
Description:
The plugin allows players on the server to organize votes for changing the map.
For voting to take place, a certain number of players must write "/rockthevote", "rockthevote" or "rtv" in the chat.
Maps will be automatically loaded from the maps.ini file (if one exists) or from the mapcycle file.
Installation:
1. Place rockthevote_custom.amxx to a folder plugins
2. Register rockthevote_custom.amxx plugin in plugins.ini file
3. Open configuration file amxx.cfg and enter the necessary variables there
4. Restart or change card
Variables:
amx_timevote- how many minutes will voting work from the start of the game on this map (by default - 5)
amx_howmanypercentage- what number of players (in percentage, 0 - 0%, 1 - 100%) should vote for changing the map (by default - 0.3, that is 30%)
amx_howmanypercentage- how many players should vote to change the map (default - 8). That is, if 30% of the players voted, but the number of voters turned out to be less than 8, then the map will not change (this was done so that if there is a small number of players, the rest do not get screwed because of two or three idiots)
amx_rocktime- the length of time (in seconds) allocated for the voting itself (by default - 10)
amx_directmapchange- the server will display a message in the center of the screen, let you finish the round and change the map (default - 0)
Steam UI - Metro for Steam:
Created - March 26, 2012
Current version is 3.8.4
Last updated - September 2, 2014
Updated - By the Author
Steam BroadCast Support - Unknown
Steam Music Player support - Yes
Steam Trading Cards support - Yes
Steam Big Picture Mode support - Yes
Description:
Skin for the Steam game client, made in the Metro style (Windows 8 / Microsoft, Metro UI).
:: Description::
Everyone probably knows the ready-made servers from the site c-s.ua, and everyone also knows their unpleasant inscription “*** CepBep Cka4eH C c-s.ua ***”. Well, I wrote a plugin that does exactly the same thing, only the message wakes you up;]
I made 2 types of plugins with 1 in 1 actions, like on c-s.ua. Type 1 - the message wakes you up as usual (under the radar). Type 2 - the message awakens in a new way, over time.
CVAR's:
reklamko_time "180" - interval between displaying HUD messages (in seconds)
reklamko "TEXT" - a message that is displayed in the game
[+]
reklamko_time_msg "5" - time in seconds for how long the inscription will hang.
Additionally:
- Let's open the source code (.sma)
- We are looking for the line set_hudmessage(0, 255, 255, 0.02, 0.18, 0, 6.0, 5.0)
- In the line, 0, 255, 255, these are the colors of the R G B format (you can change them)
- 0.02, 0.18, are the X Y coordinates where the inscription wakes up (you can change it)
Voice communication is a key link necessary for a serious game in counter-strike 1.6. When playing in public, many will not notice the difference, except that it becomes much more fun to play, but well-coordinated team play is impossible without good communication. If you want to participate in clan wars and eventually go to championships, you need to master it.
Microphone settings
In some cases, it is not necessary to have headphones with a microphone; if you have a modern laptop, then it should have a built-in microphone by default; such a microphone works flawlessly, since it is part of the native hardware.
If you have a PC, you can use headphones with a built-in microphone or a webcam. Connect them to the required connector and you can start setting up.
The entire action of launching a microphone in KS lasts for a few simple steps:
1) Launch the game
2) Go to game options (options)
5) Adjust the sound recording volume as you wish, this is done by scales with sliders
6) Click on the test microphone button in the recordings. If anything, turn up the volume.
7) Even if the volume is not enough for you with the sliders turned up to the maximum, you can use the “Boost microphone gain” function.
You can now use the voice feature in the game to use it hold down the k key, then a loudspeaker icon will appear on your player interface (depending on the build) and you can talk. If you release the key, the function will be interrupted, this is understandable; voice noise would distract players if the connection worked constantly.
If the microphone in the game does not work, you should check its functionality:
On older systems, like Windows XP, you need to select the volume tab on the right side of the taskbar and go to its properties. Among the sections in the volume controls, find the microphone and check the box next to it. Now the volume tab will display a microphone volume slider, set the volume you need and in the additional settings enable the MIC boost option.
On modern systems, like Windows 7 and 8, there is no access to properties in the volume tab. Therefore, go to the control panel, then to the equipment and sound tab, go to sound and select “Record”;
If you don't have a microphone set as your default recording tool, now is the time to do it. Using the “microphone” icon, right-click and select its “properties”, after which we make the necessary changes.
To check the functionality, you can listen to your own microphone, to do this, select listen and start listening to the sound from the selected microphone, after you clicked apply, you can experiment with the volume.
Fine-tuning the sound output through the microphone is possible through the levels tab.
The mIRC client is a convenient free program, somewhat similar to the console in CS, where you can write scripts, commands and easily sit in closed channels to communicate with teammates.
The procedure for installing it is as follows.
First you need to download the client
Launch the launcher and install it on your computer
Everywhere is empty, because you need to select a server, select the bookmark of the same name.
We write irc.quakenet.org 6669 to the server address
Add the address to the list indexed by the client using the ADD button.
Let's connect at the chosen address.
We connect to the channel, where we can find a partner to play or even a whole team.
For playing with premade
Mix.ru
Mix.rus
Promix
Hsmix
For team games
5x5
Csdm.ru
Pracc.ru
Alternative connection option
The first five points are identical to the previous one, so we boldly repeat them.
Instead of going to the servers tab, we enter a console command, enter the following: /s de.quakenet.org 6669.
To select channels later, we will also use the console, enter the command: /j ***, but instead of asterisks we enter the name of the channel, that is, for example: /jmix.ru. Immediately after entering, you can go to the desired channel.
Difficult channel search
Many people gather in cozy closed societies, almost like guilds, they sit on special channels, access to which is possible only after authorization. It’s not a fact that you will find what you need there, but usually seasoned mIRC users sit there.
As you can see, you need to do quite a lot, but all this is done once, so it’s better to be patient and see it through to the end, the advantage over other players without a connection is worth it.
It’s worth noting right away that authorization is optional and many players successfully play and form teams without it, since the capabilities of the channels are not limited. On the other hand, an authorized user has an exclusive right to his nickname, that is, it is something like a passport. To do this, we must enter the same information in the registration fields as when logging in, only then confirm it by clicking on the link from the letter that arrived in the mailbox.
Next we will be transferred to mIRC and we will have to enter the following: /msg [email protected] auth *nickname* *passwordname*. We can find them using the link that came to the mailbox, after which registration can be considered complete.
Search for players in MIRC
For easy navigation, mIRC has its own dictionary of established commands and concepts; it is constantly updated, so look for the latest versions in a search engine.
Here are the most established concepts:
Amsg message that is read by all players in the channel.
On/+ - means that you have the requested service enabled, + means I confirm
OFF/ - means that you have disabled the requested service - means negative.
Noob - for beginners in serious counter. Please note that good players in public matches can also be noobs.
Mid - average level of counter play (i.e. high for public)
HS - high skill, i.e. high level of play.
PRO level of eSports player's game
FFM- free for mix. The player is looking for other free players to play together.
Steam - Clarification that you have a steam version of CS (licensed)
TS and Ventrillo. Two well-known voice communication programs are the most popular among counter-strike players and are used by established teams.
PCW - training match.
X VS/V X. Where for x we take a number from 1 to 5, this means the rules for conducting a match, be it a duel, a battle of mixes or a full-fledged team deathmatch.
Example
So, we enter SEEK PCW or SEEK HS PCW into the chat, which means searching for a team for a training match, the prefix HS means highskilled, that is, you sign off on your own ability to play well and are looking for a similar team.
Alternatively, you can not join someone else’s mix/team, but create your own, to do this, create your own channel, in order to do this, simply write the join to the unoccupied channel name (/j *channelname*). Next, set a name or, in other words, a tag on your channel.
A tag is the name of a team, so CS players also call it a clantag.
Articles for cs go
sandwich
02.05.17
17 928
1
Welcome to the project site. Sandwich is with you and today we will talk about setting up a microphone in cs go. Many of you have probably encountered the problem that sometimes the microphone does not work in the game or you are hard to hear. After reading the cs go guide: setting up a microphone through the console in the cs:go game, you can easily set up your microphone. Below there are console commands that you need to copy and paste into the console with your value.
Console commands for setting up a microphone in cs go:
voice_loopback 1- if we indicate the number 1, then you will hear yourself. I recommend that you enable this command and create an empty cs go server where you will configure it. It will be much clearer for you, then indicate 0 and disable this option after all the settings.
voice_scale X- the command will allow us to adjust the volume of all players in cs go. Where X is a value from 0 to 1, in increments of 0.01, that is, we can specify the parameters: voice_scale 0.30, it’s up to everyone. If you want to completely mute players, I recommend visiting the game menu and muting players there.
voice_overdrive X- it often happens that loud shots, footsteps, explosions are heard, but no information is heard from an ally. The voice_overdrive command will allow you to reduce the noise of gunshots, explosions and other noises. The command only works when someone starts speaking into the microphone, and the extraneous noise immediately decreases. Write the value 10 to the console and all unnecessary sounds will decrease by 50% when someone speaks.
voice_overdrivefadetime X- will allow you to determine the time in seconds at which the sound attenuation effect will be effective. I recommend setting the value: 0.4
voice_maxgain X- makes the sound of your allies much better, the sounds are smoothed out. I recommend the value: 3, but it is better to conduct an experiment on public pages.
voice_avggainX- removes noise that can be heard from you. Value from: 0.1 to 0.5
voice_fadeouttime X- this command allows you to fade out your voice, I recommend setting the value: 0.1
snd_restart- it happens that some maps have their own music, which can interfere. If you don’t want to hear music, I recommend that you write the command in the console: snd_restart, it will turn off the music for you.
snd_show- did you like the music that plays on the server? Write this command: snd_show to the console and any sound on the server will be shown from which folder it was taken.
This concludes the microphone setup, I hope you have configured your microphone. If you have any questions, ask in the comments, I will be happy to answer them. If you have anything to add to the cs go guide, I recommend that you write in the comments what I forgot to write, I will add to the article, and I will thank you. Hmm, I almost forgot, if you play with skins in cs go, I recommend reading the article that reveals the secrets of skins, it’s quite interesting, article