What to do if the mouse doesn't work? Troubleshooting mouse problems. How to fix a mouse if the button works many times in one click The LMB button on the mouse does not work

Hello, dear readers of the blog site. I don't know if you have encountered such a problem as double or triple mouse button activation in one click, but it’s clear that such a problem exists and it often occurs among users, as evidenced by numerous posts on the forums. What can I say, I myself have repeatedly witnessed a situation where with one click of the left button 2-4 windows opened at once, instead of one, this was terribly annoying and interfered with work. And then I wondered how to fix a mouse without special tools.

And here’s what I managed to find out: on different sites they write that you need to resolder the microphone (switch - a button on the board that makes a click) from some non-working mouse, or put paper/insulating tape under the key and then, they say, the problem will go away. However, there is a way in which there is no need for a soldering iron or placing anything underneath, and repairing the mouse will take you no more than 10 minutes. The difficulty is that to implement this method you will have to disassemble the mouse, but the same thing will need to be done with other methods.

The body of any computer mouse is held together with screws, some of them may be in such places that a quick inspection may simply not find them. Usually, the screws are on the bottom, they hold the bottom of the mouse and its other parts together. Carefully remove all screws visible to the eye, then tug on the body - if the bottom is still holding something, then you need to find hidden screws, I suggest looking for them, for example, under stickers or overlays. Be sure, before you begin to disassemble the mouse, disconnect it from the port to avoid any troubles.

There are different types of computer mice - gaming, office (regular), wireless, and so on, but their internal structure is very similar. Regardless of how many buttons a mouse has, each of them will have its own microphone. What is noteworthy is that these mics are identical, which allows them to be replaced in the event of a breakdown. Even the scroll wheel has its own switch.

The switch itself consists of two parts, the lower part (base) is attached to the printed circuit board with contact pins using soldering, the upper part is the switch housing, which covers the internal part. Inside the switch there is a thin copper plate of a peculiar shape, when it bends under the influence of force - you can hear a click, the same “click” that all mouse buttons usually make. The problem lies precisely in the plate, but to get to it you will need to remove the switch housing.

It is best to do this with a thin screwdriver or something else that is convenient for you to work with. Carefully pry the microphone housing from the end, then do this along the entire perimeter of the switch. Be careful, as a result of opening it, a small plastic button may fall out (it is red in the image), this is the part through which the force from your finger pressing is transmitted to the copper plate. The plate is supported on supports, which do not allow her to “walk” within the confines of the building. However, one of the ends of the plate is not firmly fixed, so in order to release the plate, you will have to move it a little to the side.

Great, now. The fact is that over time the metal sags (“gets tired”), and in a certain position the plate drops so close to the bottom contact that in a split second it makes several short circuits, as a result of which we can observe multiple openings of windows in Windows with one click, For example. It is necessary to turn the plate over, use a screwdriver or other object to slightly bend the “tail” upward, it is important not to overdo it, otherwise you can break the plate (copper is very thin).

Now you need to put the plate on the mounts, It is better to start installation with the moving side of the plate. I don’t argue that this is not so easy to do, because the part is very small, but with some skill everything should work out. But putting the plate back in place is only half the battle; you also need to install the mic housing back, fortunately it is secured with latches. Before installing the switch housing in place, insert a white (or any other color) button into it from the inside so that its narrow part faces up, after which you can snap the housing back.

Well, that's all, now all that remains is to put the mouse back together by tightening the screws at the joints. If you did everything correctly, then you don’t have to take your mouse for repair or run to the store for a new one. And if suddenly problems with the mouse recur, now you know what to do. In such a simple way, even You can adjust the hardness of the click, simply bending the plate to the desired distance. Personally, I like my mouse button clicks to be crisp, firm, and accompanied by a loud click.

This procedure can be repeated as many times as necessary until the lower part of the micrik falls apart; nevertheless, plastic cannot be called a material resistant to mechanical damage. Another option is to completely solder the microphone, for example from an old but working mouse. But firstly, it will take more time, and secondly, not everyone may have a soldering iron and solder at hand. In addition, you can try to order such switches from the Internet, and if something happens, rearrange the copper plates from there, it will be much cheaper than buying even the simplest mouse. Thank you.

During the day, an active computer user clicks the left mouse button tens of thousands of times if he is busy with regular office work. The mechanisms in the manipulator are ready for this, and failure of the mouse due to a broken button is very rare. In this case, situations are possible when pressing the left mouse button does not lead to the desired action. Sometimes a similar problem can only occur with double or triple clicks, which are supposed to be used in the Windows operating system. Below we will give tips on what to do if the left mouse button does not work.

Computer mouse diagnostics

If the left mouse button does not work, the first thing you need to do is make sure that the problem is not related to mechanical or electronic damage to the manipulator. Even if the button clicks as before, the command may not work due to problems with the mouse board components. To verify this assumption or refute it, you need to check the operation of the mouse on another computer.

Important: When connecting a USB mouse to a new computer, you will need to wait some time until Windows detects the mouse and installs the necessary drivers for its operation.

If the mouse works on a third-party computer, you can continue testing it on the PC where there were problems, looking for ways to fix them.

Connecting a mouse to another USB port

USB mice are the most common on the market, and it is quite rare now to find mouse devices with a PS2 connector. If your computer uses a USB mouse, first try connecting it to a different connector on the system unit. This is the most common reason why the mouse does not work.

It should be remembered that after connecting the mouse to a new USB connector, you must wait a while until it is detected.

Disabling Power Saving Mode

The Windows 10 operating system has a power-saving mode that automatically turns off some connected devices, considering them to be inactive. If the mouse power is turned off or reduced, you may not be able to press the left mouse button. To make sure that the problem is not related to the power settings, you can do the following:

After making settings in all designated devices, restart your computer and check if the problems with the mouse persist. If nothing has changed and the left button continues to not issue commands as expected, you need to check the power settings in the control panel. For this:

After saving the changes, restart the computer again and check the correct operation of the manipulator.

If the problem occurs on a laptop, then you need to try disabling its touchpad, which may conflict with the mouse. The method for disabling the touchpad differs on different laptop models. In most cases, to disable the touchpad, you need to press the FN function key on the keyboard and one of the buttons from F1 to F12, which shows the corresponding icon for disabling touch control of the mouse cursor.

Another glitch of the Windows 10 operating system is the Start button suddenly not working. Just imagine that you are working, working, and then bam - and such a surprise popped up. Start stopped working due to regular Windows 10 updates, either because you messed up something in the registry, or it was not you who messed up the registry, but some program. What to do in this case? I've sketched out a few ways to solve this problem and get the Start menu working.

The first method I have is for those who like radical measures. Namely, you can do it, follow the link and read how it can be done.

The second method helps in almost all cases.

Restoring the Start Menu Using PowerShell

In order not to describe for a long time what’s what, I’ll say that PowerShell is a utility similar to the command line, only even cooler. How can we launch it if this very “Start” does not work for us. This can also be done in several ways.

Firstly, you can press the Win+R key combination and enter powershell in the window that opens

Secondly, you can do this through the task manager. Press the key combination Alt+Ctrl+Del and go to the task manager. A window opens in which we click on "File - Run new task"

In the window that opens, place a bird next to the item “Create a task with administrator rights” and enter the powershell command.

We get the following window.

Copy the following set of commands into it:

Get-AppXPackage -AllUsers | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”)

Click on enter. The “spell” you entered has started working, and in a few minutes you will see errors highlighted in red in the window. After that, you can click on “Start” and check its functionality.

The next way to restore the Start button is to restart Explorer

To do this, go to the task manager we already know and in the “Processes” tab, restart the explorer. Right-click on the corresponding process and select the item from the drop-down menu "Restart".

Working our magic on the registry editor

If all else fails, then turn to the registry. To do this, press the key combination we already know Win + R and in the window that opens, write the command regedit. Click "OK".

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced

On the right side of the window we look at the parameters. We look for EnableXAMLStartMenu, if it doesn’t exist, then we create it. To do this, click on an empty space and select "New - DWORD Value (32 bits)"

Set the value 0 to the newly created parameter.

If you had this parameter, but it had a different value, then you need to change it to 0.

Now all that remains is to restart the computer and Check if the Start button works.

I hope you have fixed your problem and I will be glad if you write down in the comments about the work done, and also indicate in what other ways you solved this problem.

We also watch the video

Upgrading to Windows 10 was not without consequences for many. As often happens, Microsoft rolled out a “crooked” update, so on some computers, laptops and netbooks it brought as much joy as problems. And one of these is the failure of the Start menu to work correctly. Sometimes rebooting the system helps, but in some cases even that doesn’t help. What to do if the Start menu does not work in Windows 10?

We invite you to look at all the ways to solve this problem in the course of this article. By the way, judging by the latest news, other elements built into the newly created system also refuse to work from time to time. With the help of our tips you can overcome them too.

What to do if the Start menu does not work in Windows 10

The first and easiest is to restart Explorer, also known as Explorer.exe. But if rebooting the system does not help, then it will not be of any use. If, after restarting the computer, Start starts working correctly again, you can use this method constantly.

You probably know the combination that turns on the Task Manager. Yes, yes, these are the famous three buttons CTRL+Alt+Del. What do we have to do:

If a miracle did not happen and it still does not function, then the problem is somewhere else and a different solution must be sought. Fortunately, our article does not end here.

PowerShell as a way to get Start back up and running

First, I would like to warn you that this method not only helps solve the problem, but can also cause some problems with installed applications from the Windows 10 store. On the other hand, you can always reinstall them - this solves any problems that arise with downloaded applications.

Let's figure out what needs to be done:

There are two options to launch PowerShell - to climb into the jungle of the operating system through a huge number of folders or use the “Run” window. We suggest you use the second option - it is faster, simpler and more convenient.

1. Launch the “Run” window using the Win+R key combination;
2. Enter “Powershell.exe” into the line, then click “OK”;
3. A window similar to the Command Prompt opens, only blue;
4. Copy the following combination and paste it into the program: Get-AppXPackage -AllUsers | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml” ;
5. Click on “Enter” to execute it;
6. After some time, you should check if the Start menu is working.

If no changes occur, you should move on and try other methods.

Restoring functionality to Start using the Registry

Open the “Run” window;

Enter “regedit” there;

Go to the section HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced;

Most likely, it will be empty, so you need to right-click and select “Create” in the menu that appears, and then “DWORD”;

Name the parameter EnableXAMLStartMenu;

Now you should double-click on it and change the value to zero;

Next, you should check again whether the Start menu is working or not.

If nothing like this has yet happened, there is no need to despair - there is only one last option.

Security and Maintenance – Built-in Problem Solver

Create a new user

Often the problem is in the Russian username, so you should create a new one:

When you boot your computer, select the user you just created and check that the Start menu is working. One of these methods should bring him back to life anyway.

After updating to a new version of the operating system, some users are faced with an unpleasant situation - the Start button does not work in Windows 10. But you can get rid of this problem on your own.

Why doesn't the Start button work?

The main reason why the Start button does not work is resetting functional settings in the OS registry editor. The Administrator settings may also be reset. But such a problem arises due to the user’s fault, and not due to OS defects (it’s useful to read “”).

Restoring functionality

Even if you are not a professional user, you can still restore the functionality of the Start menu on your own.

Restarting Explorer

An easy way to fix this problem is to restart Explorer.

Fixing the situation using PowerShell

Changing Registry Editor settings

Creating a new user on the device

Video

Watch the video for more details on how to use the methods described above, and also learn about alternative ways to solve this problem.

Conclusion

There are several ways to restore the Start button after updating Windows. If none of them help, restore the system through the Settings application, using a bootable USB flash drive or disk.

Windows 10 is considered one of the best operating systems in the Microsoft line. Since its introduction, users have noted some bugs and problems, most of which have now been completely resolved. Unfortunately, the problems with the “ten” continue to be relevant, and a search for solutions is constantly needed.

One of these problems is a problem with the operation of the Windows 10 Start button. This bug is often accompanied by the inability to open other system elements (for example, the All Settings window). The Start button may not work after the update. Also, a problem with the menu and button may occur after installing Windows 10 from scratch.

We will try to describe all the options why this happens and ways to resolve the situation, the effectiveness of which has already been proven by Windows 10 users.

Among the methods for solving the problem with the operation of the Start menu, a banal reboot of the explorer.exe process on a personal computer with Windows 10 stands out. To do this, press the key combination CTRL+ALT+DELETE to call the “Task Manager”. Another way to get to the Task Manager is to press CTRL+SHIFT+ESC. Here we click on “More details”. If there is no such window, simply go to the “Processes” tab.

Among all the processes we are looking for “Explorer”. In the English version of Windows 10, this process appears as Windows Explorer. Right-click on this process to bring up the context menu and click on “Restart”.
This method is ineffective, but if there was no particular problem with the Windows 10 Start button before, this method may work. More serious problems will require more serious measures.

Resuming the Start Menu using PowerShell

Before you start working with PowerShell, you should keep in mind that this method, in most cases, works great to solve problems with the Start menu. However, this method may entail changes in the system and, therefore, other troubles may arise. In particular, we are talking about disruptions in the operation of some applications downloaded from the Dozens store. So, first of all, we try the method described in the previous paragraph, and move on to manipulations with PowerShell if the actions do not bring results.

Since the Start button is disabled, the PowerShell function can only be launched from the Windows\System32\WindowsPowerShell\v1.0 folder. We look in this folder, and then right-click on the powershell.exe file to run it as administrator,

There is another method to run the PowerShell file with administrator rights. You need to right-click on “Start”. A menu will open where you need to click “Command Prompt (Administrator)”. In the field we type powershell. In the future, all necessary combinations are entered here. When working with the command line, a separate window will not open.

In the PowerShell window, enter the following command:

Get-AppXPackage -AllUsers | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)AppXManifest.xml”)

You don't have to do this manually, just copy and paste. After the command is completed, try to open the Start menu. If there is no discovery, move on.

Working with the Windows 10 Registry Editor

There are several other ways to get the Start menu working. Among these additional methods, a good option would be to do certain manipulations with the registry editor.

To enter the editor window, press Win+R and enter the regedit command in the line that appears. We will need a section HKEY_CURRENT_USER\ Software\ Microsoft\ Windows\ CurrentVersion\ Explorer\ Advanced.

Right-click anywhere in the field on the right. Select “Create”, then DWORD (32). The new parameter must be named: EnableXAMLStartMenu. Now let's set the desired parameter value. This is done by double clicking the mouse. We assign the parameter the value 0.

We solve the problem by creating a new user

If the problem persists, perhaps creating a new user will be a way out. Press “Win” + R. In the search field, enter Control to enter the control panel, in which we create a new user.
You can also create a new user via the command line. Press “Win” + R, enter net user Username /add in the field .

As a rule, for a new user, the start menu and all settings work without problems. All that remains is to transfer all the files to the new account.

What to do if none of the options helped

It happens that nothing helps. Then all that remains is to use Windows recovery mode. This means a return to the original state. But usually a simple update rollback works. In “Control Panel” select “Programs and Features”. Here we look through the updates and delete the most recent one.
Rolling back updates is good because after updating again, there are no problems opening the Start menu.

A significant disadvantage is the time that you will have to spend waiting for the previous version of Windows 10 to load. Any of the methods listed can help. But you need to start trying exactly in the order in which we arranged them. This way, the likelihood of aggravating the problem with the Start button is minimized.

Operating updates will be available from the official Microsoft website. Microsoft systems improve the performance of your computer, make it safer and add new functionality to the OS. However, with such updates come some problems. For example, after the next update, some users see that their “Start” button does not work in Windows 10.

At the same time, it does not easily respond to a mouse click on its icon, but it also does not work after pressing the Win button on the keyboard (the key with the Windows logo). Often, along with such a problem, the system parameters, as well as its other elements, do not open. In this article we will figure out how to get out of this situation and return the system to functionality. If you do not want similar difficulties to be repeated in the future, you can completely.

To combat the constantly broken Start menu, in 2016 Microsoft even created a special application that was supposed to automatically fix the problem.

This method is the simplest, use it first, if after rebooting the system the start still does not work, proceed to the next options. Explorer.exe is a graphical Windows shell. It is responsible for everything we see, including Windows Explorer, the taskbar, the system tray, and even widgets. Like all other programs, this application may malfunction, for example, due to a basic conflict with data cells in RAM. So, in order to bring the Start menu back to life, first of all, let’s try to restart this process.

How to fix

Follow our instructions:

1. Launch the task manager. You can open it using the Ctrl+Shift+Esc button combination or through the context menu of our taskbar. To do this, right-click on its empty space and select the item indicated in the screenshot.

1. If you are running the tool for the first time, you will need to deploy it. To do this, click on the “Details” button. We have marked it with a red frame.

1. We go to the tab with the name: “Processes”, find the “Explorer” process there (sometimes it can be called Explorer) and using the context menu launched by right-clicking on the process name, select the “Restart” item.

The entire Windows 10 GUI will momentarily disappear and reappear. If this option does not solve your problem, feel free to move on to the next method, it will be more effective.

Solving the problem using the system registry

This method is more effective than the previous one; it involves changing the value of the system registry key. If there is no such key, we will create it. Let's look at how to do this correctly.

1. Initially, you need to run the standard Windows 10 utility called regedit. In order to do this, press the combination Win + R and enter the word regedit in the window that appears.

1. In the window that opens, on the left side there is a registry directory tree. We follow the path indicated in the screenshot. On the right side of the program, select the EnableXAMLStartMenu key, and if it doesn’t exist, create it. To do this, right-click on the empty space on the right side of regedit and select “New” - “DWORD Value (32 bits)”.

1. Now we rename the new parameter to EnableXAMLStartMenu and, opening it by double-clicking, set the value to “0”.

1. In order for the changes to take effect, you need to restart the Windows graphical interface. We described how this is done in the first method.

Correction of Cyrillic username

Sometimes the Start menu stopped working after creating a new Windows user with a name written in Russian. In order to correct this situation, you need to use the Computer Management utility and correct the name. Let's look at how this is done.

1. Initially, we open computer management through Windows search. To do this, click on the magnifying glass icon on the taskbar and enter a query in the search bar. When the result appears, click on it.

1. Next, on the left side of the window, open the “Utilities” section, go to “Local users and groups” and click on the “Users” folder. In the right part of the window, find the name that needs to be renamed and right-click on its name. There will be a “Rename” item here, which is what we need.

Ready. The Computer Management tool can be closed; the changes will be applied as soon as you restart the system. If this method does not give the desired result, try creating another user and checking the functionality of the Start menu on it.

To do this we do the following:

1. We launch the “Run” utility; to do this, use two simultaneously pressed Win + R keys. In the window that appears, enter the word control and press Enter.

1. After opening the control panel, go to the “User Accounts” menu.

1. Click on the inscription indicated in the screenshot.

1. Next, select “Manage another account.”

1. And add a new user.

1. You can get to the same menu in another way. Open the Windows 10 notification shade and click on the “All Settings” tile.

1. Scroll down the window that opens a little and select the “Accounts” tile.

1. On the left side of the window, select the “Family and other users” subsection, and on the right, click on “Add a user for this computer.”

1. Here you can create another Windows 10 user, if you do not want to link his account to a Microsoft account, click on the item indicated in the screenshot, and in the menu that opens, select “Add a user without a Microsoft account”.

Restart your computer or simply end your current session and select the user you created. If the launcher starts to open, then the problem is in the account.

Using automatic maintenance mode in Windows 10

Windows 10 has its own debugging tool, which is supposed to fix various problems for the user. Sometimes this function solves the problem of the Start button not working, let's look at how to use it.

1. In the search bar of Windows 10 (which is launched by the magnifying glass icon), we write the words: “This computer.” Right-click on the item indicated in the screenshot and select “Properties”.

1. In the window that opens, click on the inscription: “Security and Service Center” (located in the lower left corner).

1. Expand the “Maintenance” section.

1. Using the button indicated in the screenshot, we launch automatic system maintenance.

1. The service has begun and will take time. The less you use your computer during this period, the faster the process will complete. Upon completion of the PC scan, all problems found on it will be corrected if possible. If desired, the service can be disabled.

Attention! For a more complete, quick and correct check, we recommend closing all running programs and saving the data. The program runs only as an administrator.

Using PowerShell to fix the Start menu

Here is another option that will help improve the operation of the Start menu. We take the following steps:

1. First you need to launch PowerShell itself. To do this, we will use the built-in search tool. Click on the magnifying glass icon on the left side of the taskbar and enter the PowerShell command in the search field. When the result we need appears (indicated by number 3 in the screenshot), right-click on it with our manipulator and select the “Run as administrator” section.

Sometimes a program cannot be found through search. To get around the problem, go to Windows Explorer along the path indicated in the screenshot and run powershell.exe. You need to run the file as an administrator. To do this, right-click on its name and select the desired item.

You can also call Windows PowerShell through the command line; you must run it as an administrator. After cmd.exe opens, type the powershell command into the black window and press Enter.

When the program is running, insert the entry into it:

Get-appxpackage -all *shellexperience* -packagetype bundle |% (add-appxpackage -register -disabledevelopmentmode ($_.installlocation + “\appxmetadata\appxbundlemanifest.xml”))

Executing the command will take a couple of seconds. Now restart your computer and check if the startup starts working. If not, move on to the next method.

Attention! Using this method may break the Windows Store. Therefore, it should be used only as a last resort.

Windows 10 Start Menu Fix Utility

As we already said, people from Microsoft are aware of the startup problem. That is why they created a miniature program with which we will work. Follow our instructions:

1. Initially, let's download the program using the button below. The download is from the official Microsoft website.

Download the Start repair program

1. Run the application as an administrator (no installation required) and click on the “Advanced” line.

1. Make sure that the box next to “Automatically apply fixes” is checked and press the “Next” button.

1. The program is running and the system is being checked for problems with the Start menu.

1. As you can see, no problems were found. If you have them, corrections will be made automatically. If you click on “View additional information”, you can understand by what criteria the Microsoft tool searches for problems.

Parameters that the program checks:

• incorrectly installed important applications;
• problems in the system registry;
• tile database integrity;
• application manifests.

The report that the utility produces can be printed, and each item in the window displays a tooltip explaining its purpose. These same items are also elements of the table of contents; if you click on one of them, we will be taken to the desired part of the help section.

What to do if the problem is not solved?

We have presented many methods in case the Windows 10 start button stops working, for example, after an update, and usually they are enough for any situation. But even if none of them helped you, don’t be upset. Any Windows OS, and Ten in particular, has a system of checkpoints, thanks to which you can roll back Windows to the state in which the system was at the time such a point was created.

It is important to create checkpoints before any serious action with the OS, and especially before updating, which often leads to problems. In any case, if you still have questions, ask us in the comments, and we will try to answer in as much detail as possible and help solve the problem.

Another glitch of the Windows 10 operating system is the Start button suddenly not working. Just imagine that you are working, working, and then bam - and such a surprise popped up. Start stopped...

Another glitch of the Windows 10 operating system is the Start button suddenly not working. Just imagine that you are working, working, and then bam - and such a surprise popped up. Start stopped...

If the left mouse button does not work, then there can be no talk of any normal interaction with the manipulator. The problem needs to be fixed urgently, preferably without the financial costs associated with purchasing a new input device.

If the mouse problem occurs on a laptop, try disabling the touchpad. The device conflict will be resolved, the button should work.

Device diagnostics

Before attempting to troubleshoot the problem, make sure that the mouse is physically intact. It may not work because it is damaged. In this case, no software methods will help. If it is not an expensive gaming controller, it is easier to buy a new device.

To check the status of the mouse, connect it to another computer.

If in this case all the buttons function normally, then return the device to the PC on which the problems occurred.

Using a different USB port

So, you have determined that the equipment is physically intact. Therefore, the cause of the problem should be sought in the operation of the computer. The first step is to connect the mouse to another USB port.

After connecting to another connector, wait until the system detects the equipment. After a short installation of drivers, the mouse will appear in the list of devices. Check if the left button works.

Disabling Power Saving Mode

Windows has a power saving mode, one of the options of which is to automatically turn off some devices. If the mouse does not have enough power, it stops working. To make sure that everything is fine with the power supply, you will have to use another mouse that works fine.

After making changes to the properties of all controllers, restart your computer. If the left button still doesn't work, check your power settings.

Sometimes users encounter a problem when the mouse does not respond to clicks. Why might this happen? How is it proposed to deal with the task? What features and nuances of the process are recommended to pay attention to? Sometimes factors that are not at all related to information can influence the mouse. Users can immediately take faulty equipment to system administrators for diagnosis. This is a logical decision, but there is no need to rush. You can independently figure out why the mouse does not always respond to clicks, and even cope with problems without outside help.

Garbage

The first and fairly common cause of the phenomenon under study may be simple clogging of equipment. If the mouse does not respond well to clicking or does it only once in a while, it is recommended to check its cleanliness.

Clogging can be eliminated only with new equipment. If the device has been working for some time, then if there are problems with the mouse, you can clean the component. It's not that hard to do. The result will not be long in coming - after the user removes all the dirt accumulated under the buttons, the mouse will work at full capacity.

Malfunction

But this is only one option for the development of events. In fact, there are a lot of possible scenarios. Mouse not responding to clicks? It is likely that the equipment is faulty. Relevant for any devices - both new and those that have been working for some time.

It is recommended to take faulty equipment to a service center. There, the technicians will check the device and tell you whether it can be repaired. If yes, then you can leave the mouse at the service center until the problem is fixed. Otherwise, you will have to completely change the input device.

Functionality check

If a new mouse or a mouse that has already been cleaned of dirt and dust does not respond to clicks, you can check its functionality yourself. To do this, it is recommended to connect the device to another computer, install hardware drivers and make sure everything works.

This technique allows you to make visits to service centers with specific complaints. Also, with the help of such a check, you can often understand the sources of problems and failures. What other scenarios are possible? What should you pay attention to in this or that case?

Jacks and connectors

Mouse not responding to clicks? What to do? For starters, don't panic. This problem occurs among many users; often the source of the problem is a purely technical component; this does not pose any danger to the computer or operating system.

Alternatively, the cause of problems with the mouse may be a damaged connector. The socket to which the equipment is connected is damaged, as a result of which contact between the machine and the manipulator is established only once.

There is only one way out - connect the mouse to another socket. This is the only way to fix the problem. By the way, the connection connector on the device may also be damaged. In this situation, it is better to purchase a new mouse. After all, connectors are usually not repairable. Or after these manipulations they still break, and very quickly.

Drivers

What if the mouse does not respond to clicks or does it every once in a while? There are a lot of options for the development of events. It has already been said that often all problems are technical. But there are exceptions.

For example, the following layout is typical for gaming mice. It's all about the drivers. This software is responsible for recognizing devices in the operating system. An old version or the complete absence of these applications can lead to the fact that the mouse will work only once in a while. Or they will even find themselves among equipment unknown to the computer.

In this case, you just need to install drivers on your computer (usually they are included with mice) or update existing ones. After this, the operating system reboots. Is there any progress? Then you don't have to worry. The mouse still doesn't work fully? We need to look further for the source of the problem. There are still many alternatives.

Touchpad

Only laptop owners encounter this problem. Does the mouse not always respond to clicks or does not work at all, although there is a cursor? You can try to check the operation of the touchpad. If it functions normally, it is recommended to disable this component.

The thing is that some laptops and operating system builds do not support simultaneous operation of the touchpad and mouse. Therefore, a hardware conflict occurs. As a result, the mouse refuses to work normally.

As soon as the touchpad is disabled, the connected device will return to full functionality. And you can continue to use the mouse. By the way, you shouldn’t be surprised if the problem arose suddenly - no one is immune from this.

CPU

But if the mouse does not immediately respond to clicks, then the problem may be different. For example, slow response from information is sometimes due to high processor load.

Why does this phenomenon occur on computers? There are a lot of options. Among the most common are the following:

• a large number of functioning programs;
• the computer does not comply with the system requirements of the operating system;
• viruses;
• long-term operation of equipment without shutting down or rebooting;
• lack of hard disk space for normal operation of the OS.

In any case, you need to provide the processor with unloading. It is recommended to close numerous programs running in the background and also restart the machine. It's better to give her a few hours to rest. Next, the user must resume trying to connect the mouse. The problem should go away.

Viruses

Mouse not responding to clicks? A virus, as already mentioned, is the real cause of a problem with equipment. Any computer “infection” can lead to this phenomenon.

What to do in this case? We need to try to cure the computer. If the problem occurs on a laptop, the touchpad will help. With it you can easily control your computer and cursor. The anti-virus system will find and disinfect potentially dangerous files. If this fails, the user will be prompted to delete the document.

As a rule, when the cursor cannot be controlled at all, the computer is taken to a service center. There, the system will quickly be cured of all viruses without causing any damage to the owner’s data.

Incompatibility

If the mouse does not respond to clicks, you should pay attention to the system requirements. The thing is that all modern equipment has certain demands on the computer. Non-compliance with this makes the device impossible to operate. Or it will function unstably.

When an incompatibility with the operating system is detected, you can solve the problem in several ways. Either the user changes the OS or the connected equipment. The second option is most often encountered in practice. It is recommended that Windows 10 owners pay special attention to compatibility issues. A lot of equipment conflicts with this operating system. Therefore, there is no need to be surprised that Windows does not respond to mouse clicks.

What to do in this situation? It has already been said: either change the connected equipment, or change the operating system. What exactly to do? Everyone decides for themselves.

Power supply

This is the last reason why the mouse connected to the computer does not respond. It's all the fault of the power settings. This problem most often occurs on laptops.

As practice shows, after this the mouse works better. It's actually not that difficult. It is enough to go through all possible options. This is the only way to understand 100% what’s going on. There is also no need to rush into purchasing new equipment. It is likely that you can do without it.

If the user doubts his abilities, he can take the computer along with the faulty equipment to a service center. They will quickly help you not only diagnose, but also fix any computer problem. What exactly to do? The final decision always remains with the user!

Users often encounter problems that arise when working with a computer. One of these problems is the computer mouse stops working. What could be the cause of the malfunction will be discussed in the article.

Types of mice

Computer mice can be classified according to the following criteria.

Causes of problems

There are quite a few reasons why the cursor does not move and the computer mouse has stopped working, but they can be divided into two groups: hardware and software.

The hardware includes:

The software includes:

1. Problems related to the device driver.
2. Deliberate disabling of the mouse by malware.
3. Conflict between mouse utilities and other software.
4. Malfunctions of the operating system that created a chain of problems that led to the inoperability of the device.

Trouble-shooting

Before taking any serious troubleshooting steps, check:

Important! If the device is not recognized (device descriptor request failed) or your mouse is in the "Other devices" section, the solution to the problem is described in detail here.

Wired

If you have checked the software of the pointing device, and when connected, the cursor does not move or moves erratically, the problem is in the hardware of the device. To resolve:

Wireless with USB transmitter

If you have a wireless mouse connected to your PC via a transmitter, go through and read the publication about. Nothing helped? Try this:

Important! Software installed for another product (mouse, wireless keyboard, touchpad, sensor) may cause a conflict with the wireless mouse. We recommend uninstalling the utilities, restarting the computer and checking the operation of the manipulator.

Bluetooth

If you are using a Bluetooth-enabled pointing device and the cursor stops working:

1. Turn off, replace batteries and turn on the device.
2. Check the operation of the transceiver (restart it, connect another device to Bluetooth).
3. Check the driver for the Bluetooth transmitter.
4. If necessary, roll back to a previous version or reinstall the driver.

WiFi

If the Wi-Fi mouse cursor stops working or begins to “twitch”, the reason may be in the protocol that the router uses. This is because the device and router operate in the same 2.4 GHz band. To solve this problem without replacing the mouse:

1. Go to the router settings in the Wi-Fi section.
2. Change the protocol to 802.11g, and save the changes (the experiment was carried out on a D-Link Dir-615M).
3. Reboot the router and turn off/on the mouse.

Important! Changing the protocol is suitable if the Internet speed is not higher than 25 Mbit/s.

Touchpad

First of all, check if the touchpad on your laptop is enabled. We recommend that you read the information about setting up the touchpad on this page.

The touchpad can be disabled by software. Go to BIOS:

If turning it on does not help and everything is fine with the driver, then there is a hardware problem. It could be:

• damage to the touch panel;
• disconnecting the cable.

Advice! If you are confident in your abilities, you can check the fastening of the touchpad cable. It happens that during transportation it jumps out of the connector for connecting to the motherboard.

If the tips in this article did not help you identify the mouse connection problem, . Describe your problem in detail, we will try to find an answer together.

If the mouse is connected to the system unit via the PS/2 connector (the round socket on the rear panel, next to which there is sometimes a picture of a mouse), it cannot be connected and disconnected in a “hot” way, i.e. when the computer is turned on. A short circuit can occur, to which PS/2 ports are very sensitive.

If you see that the cursor does not move and the system does not respond to mouse keystrokes, turn off the computer using the keyboard. To open the Start menu, press Ctrl+Esc or Win. Use the Down Arrow and Enter keys to select the Shutdown command and confirm the shutdown request by pressing OK.

Disconnect the mouse wire from the port and carefully, being careful not to bend the electrode pins, connect it again - the problem may be a lack of contact. Turn on your computer. If the mouse works, it means you did everything right.

The USB ports are designed for hot plugging. However, if a mouse connected via USB does not work, still turn off the system unit before

If the problem persists, try the mouse on another computer. If the cursor moves and the keys work, the port on your system unit may be faulty or there are software problems.

To identify the source of the trouble, alternately connect known-good mice to the computer via PS/2 and USB ports. Usually there is no need to install special drivers - standard Windows utilities are also suitable. If not a single device works, there is most likely a software problem.

Using the Win keys, directional arrows, Tab and Enter, from the “Start” menu, go to the “Control Panel”, activate the “System” icon, in the “Hardware” tab, click “Device Manager”, then expand the “Mouse and other pointing devices” list . Use the combination Shift+F10 to call up the context menu and select the “Delete” command, then reboot. The system, having detected a new device, will reinstall the drivers for it.

If you connected new equipment or installed a new program, the reason may be a hardware conflict. Log into the system in safe mode when it boots in minimal configuration. To do this, restart your computer and press F8 after a short beep. In the boot mode menu, select “Safe Mode”. When the system asks you to continue working in this mode, answer “Yes”. If the mouse works fine, remove the new hardware and software. Boot into normal mode.

If your system has the "System Restore" option enabled, try selecting "Load Last Known Known Configuration" from the mode selection menu. The system will offer you several system restore points to download. Choose the one closest to the time when the problems started. If the attempt fails, try another date.

There is another way to enter system recovery mode. When rebooting, select the “Safe Mode” option, but answer “No” when asked by the program to continue working. You will then be prompted to select a restore point.

OS Windows has a built-in “Troubleshooter”. To launch it, go to the “Control Panel” using the keyboard and expand the “Mouse” icon. Go to the “Hardware” tab using Shift+Tab and click “Diagnostics”. To run diagnostics, use the “Next” button. To select an answer to the system questions, press Shift. Perhaps as a result, it will be possible to find out the reason for the inoperability.

If these methods do not help, check your computer for viruses. Download the free AVZ4 program and deploy it to a flash drive. Press Win+R and enter the command F:\AVZ4\avz.exe into the “Open” window, where F: is the name of the removable disk in the system. Start scanning.

If the mouse works but freezes from time to time, right-click on an empty space on the screen, select the “Properties” option and go to the “Options” tab. Click "Advanced" and select the "Diagnostics" tab. Move the “Hardware acceleration” slider one notch to the left and confirm by clicking OK.

Regardless of what type of pointing device is used, sometimes problems may arise due to the fact that the mouse cursor does not move, but the mouse works. What are the reasons and how to eliminate the consequences of the problem, read on.

The mouse cursor does not move, but the mouse works: reasons

When starting to consider the reasons, we need to focus on dividing these devices by type. The easiest way to troubleshoot problems is when using standard devices connected to computers and laptops using a special plug or via USB ports.

In the case of wireless pointing devices or non-standard models intended for gaming, there may be many more reasons why the mouse buttons work but the cursor does not move.

However, some of the most common problems include the following:

• surface contamination;
• incorrect connection or switching on of the device;
• incompatibility and other problems with the USB port;
• incorrectly installed, missing or outdated drivers;
• exposure to viruses.

The mouse cursor does not move, but the mouse works: what to do first?

In the simplest case, first you need to inspect the bottom surface of the device. If there are dirt on the underside, they must be removed. Very often, it is precisely because of this that it is impossible to perform any actions with moving the cursor on the screen.

In some cases, when the mouse cursor does not move but the mouse works, the problem may be due to a momentary software glitch. In this case, you can try to revive the mouse by simply rebooting the entire system. Please also note that if there is an inoperative device, the BIOS does not generate warning signals.

In the case of wireless devices, the problem that the mouse cursor does not move, but the mouse works, may be due to a dead battery. It needs to be replaced. Another reason is that the device is not turned on correctly. In many manipulators, in addition to turning on the special button or power slider on the bottom surface (on the back side), you also need to press the left mouse button (this also applies to sleep mode, which the manipulator goes into when the computer or laptop is turned off). For Bluetooth devices, make sure that the corresponding module is active. For Wi-Fi, you may sometimes need to log into your router and change the protocol to 802.11g.

Sometimes the reason the mouse cursor doesn't move but the mouse works may be because it's plugged into the wrong USB port. As a rule, any modern computer or laptop has several such connectors of the USB 2.0 and 3.0 standards. This also needs to be taken into account.

Finally, you can check the functionality of any type of device quite simply by connecting it to another computer terminal. If it works, then the problem is in the user's system. Otherwise, the main problem may be the drivers.

Changing the driver

For standard devices, the system installs drivers independently. But for some gaming mice, they are supplied complete with the manipulators themselves, and you need to install them manually. In such a situation, the drivers need to be reinstalled or updated. But what to do if the cursor doesn’t move?

This is where knowledge of entering commands and using the switch between various functions, applications and system sections using the keyboard will come in handy. To access the “Device Manager” you need to use the console call “Run” (Win + R), in which the command devmgmt.msc is entered, after which in the manager itself, movement is carried out using the arrow buttons and tabulator. You can also use the Start menu, opened with the Win key. Functions are called and confirmed by pressing buttons using the enter key, and the Esc key is sometimes used to cancel actions.

When reinstalling a driver, the system will need to specify its location (removable media or a folder on your hard drive) rather than using the recommended installation from the Windows database. Once driver integration is complete, it is advisable to reboot the system, although this is not always required.

Conclusion

It remains to be said that the cause should be looked for exclusively taking into account a certain type of device. But in most cases, if the mouse cursor does not move, but the mouse works, and the problem is not related to software failures or physical damage to the mouse itself (or damage to the connection cord), at least one of the above methods will restore the operation of the manipulator. Problems with viruses were not touched upon here, since every user should take care of security first.

A computer mouse is an ingenious device that was created almost in the middle of the last century. Without this simple thing, we would not be able to fully manage a computer and laptop, because there is simply no replacement for it as such. Therefore, when it stops working normally or simply “glitches”, it is necessary to somehow solve this problem. Today I will talk about why the mouse may not work and what actions need to be taken to revive it.

Causes of problems and their solutions

• To understand whether the device really does not work or the problem lies with your computer, you need to connect it to another PC or laptop. If the mouse turns out to be fully functional, then try inserting it into another port on your main computer - it is known that USB ports often “glitch”, and rearranging the plug gives the result. If you have a PS/2 mouse, I recommend purchasing a special PS/2/USB adapter so that you can use the device via any USB port. The PS/2 connector itself may not be working, hence the problems.

• The next step is to carefully look at the mouse, in particular at the LED. If it lights up, but the device does not want to work, then the problem is probably in the “software”. First, try just restarting your computer (and don’t laugh, this works in many cases) and if that doesn’t help, then try installing the driver specifically for your device. To do this, go to the manufacturer’s official website and download the necessary drivers.

• In some cases, a problem may occur after installing this or that software - there is probably a conflict in the system, as a result of which the mouse stops responding to any actions. Often something similar happens when viruses get onto a computer. What to do in such situations? It is recommended to boot the computer in safe mode and check the functionality of the “rodent”. If it works, then we either remove the installed software or roll back the system to an earlier date. And of course, don’t forget to scan your PC for viruses.

• Interestingly, users of PS/2 mice encounter this problem more often. Why? The fact is that the plug used in such devices is not ideal. It consists of many contacts (sort of pins) that tend to bend. For example, you removed the plug from the port and inserted it back, after which the mouse stopped working. Apparently, some of the pins are bent and need to be returned to their normal position. This can be done, for example, using the most ordinary tweezers or something sharp (even the most ordinary ballpoint pen may suit you). USB mice are completely free of this problem due to a much more thoughtful system.

• Theoretically, the wire could be damaged. This rarely happens, since it is not subjected to strong mechanical stress. Still, pets often chew through the wire. So, we carefully examine it for external damage, and if you haven’t found any, then do the following: pick up the mouse and start moving the wire. If the indicator (LED) starts blinking at this moment, then, apparently, the problem is really in the wire. It will need to be replaced, although in most cases it will be cheaper to purchase a new rodent.

• If you use a wireless mouse, then the most common cause of the problem is a dead battery, as well as a problem with the Bluetooth receiver driver.

• Now let's move on to the buttons and wheel. When it comes to buttons, the failure of one or both of them is most often due to a mechanical problem. Theoretically, you can resolder the chip, but usually this is not economically viable - a new mouse costs the same amount, if not cheaper. But if the wheel gets stuck, then it makes sense to disassemble the device and clean it of dirt - hair and other “charms” get wrapped around the wheel, which interfere with its operation. Try cleaning the wheel, everything should return to normal.

• Continuing the conversation about buttons, we cannot fail to mention that for additional buttons that are located on the sides of the mouse (they are usually used in games), it is necessary to install other drivers that come with the device. They can also be downloaded from the manufacturer’s website.

• If the mouse still works, but not quite adequately, for example, jumps from side to side, then dirt may be to blame for this (in the case of ball mice this is, one might say, normal) and problems with settings. If in the first case it is enough to clean the device from dirt, then in the second you need to play with the settings. For example, try adjusting the sensitivity of your gadget. How to do it, I.

• If problems with inoperability arise in games, or rather, the mouse does not work in a particular position, then the problem is 99% in the settings of the game itself.

What can't you do?

• If you recently purchased a mouse that is under warranty and it stops working, do not try to repair it yourself - this may void your warranty.

Sometimes users encounter a problem when the mouse does not respond to clicks. Why might this happen? How is it proposed to deal with the task? What features and nuances...