Asks to activate windows 10

By announcing Windows 10, the developers assured users that they would receive the new system for free, provided that a licensed version of Windows 7 or Windows 8.1 was previously installed on their computers. To retain the previous license key, it was enough to update the system to a clean installation. However, in practice, activating Windows 10 raised many questions.

General information

In the article on how to install Windows 10 from a flash drive, we looked at several options for behavior when a request for an activation key appears during system installation. Let's recall the main points:

The most reliable way to clean install Windows 10 is to perform a preliminary update.

You have a licensed version of Windows 7 or Windows 8.1 installed on your computer. You must first update the system to “ten”, and no activation key will be needed. Then, when the update is complete and you are sure that the new system is activated, you can create a bootable USB flash drive and perform a clean installation with formatting the partitions.

During installation, you must skip the prompt to enter the activation key. After installation, Windows 10 will automatically connect to Microsoft servers (an Internet connection is required) and is activated using the key from your old system. This is how it looks in theory and how it usually works out in practice. However, many users have encountered the fact that after performing the above steps, the system does not activate, and the following message appears on the screen:

What to do about this and how to activate Windows 10 if this procedure was not performed automatically? Let's look at possible ways to manually activate the system.

Manual activation

If you purchased a computer or laptop with a pre-installed system, then you may not have an activation key. The question arises, how to find out if automatic activation did not occur after a clean installation? This can be done using several small utilities that are distributed free of charge:

• AIDA64 (there is a 30-day trial period).
• RWEverything, etc.

The same operation can be performed using a PowerShell command, but it is much easier to use one of the programs above.

Changing the key

So you know the product key. First, try entering it through Windows 10 settings.

Wait for the results of the key verification. If an error appears, continue to the next method.

Command line

Let's try to manually delete the inappropriate key and enter a new one. To do this we use a number of commands:

If the key is accepted, but the system still does not activate, try performing this operation over the phone.

Activation by phone

To activate the system by phone, you must first look at the number:

1. At the command prompt, type "slui 4" and press Enter.
2. Please indicate the country you are in.
3. Call one of the numbers provided (8-800-200-8002 for regions of Russia).
4. Listen carefully to the voice assistant message.
5. Carefully enter the installation code on your phone.
6. Enter the confirmation code you received.

If the installation code you provided does not match, you will be connected to an operator who will help you resolve the activation problem.

Important: all the steps described above are official recommendations from Microsoft, collected on the technical support forum.

If none of the described methods help you, contact technical support yourself and describe the problem in as much detail as possible. Be sure to indicate how you installed Windows 10, whether the previous operating system was licensed, and whether the motherboard in the computer was replaced. This is important to determine the cause of the problem.

If you receive unpleasant messages from a new operating system stating that it was not possible to activate it, then there are a number of typical reasons for this:

1 Pirate version

You intentionally installed a pirated version so as not to pay money to the owners of the software product. Microsoft simply does not validate the key through its servers. In this case, it is quite simple to do. You should open the cmd command line in Windows 10 and write the following lines there. Naturally, this needs to be done by the administrator.

slmgr /ipk W269N-WFGWX-YVC9B-4J6C9-T83GX

slmgr /skms kms.xspace.in

After these commands, the operating system is activated without problems. If this does not help, then the Internet is full of activators.

2 Free update

You took advantage of the free update and switched from operating systems 7 and 8 series. In this case, you need to open the Settings tab in the Start menu, click on Update and Security, and then select Activation. It happens that Windows writes about the impossibility of connecting to the Internet. If the connection is established, activation should occur automatically. Sometimes all Microsoft servers are simply busy, so you should wait patiently for a while and try again.

3 Unpaid license

You should check the Go to Store tab to see if there is even an available license for your computer. This tab appears along with the Windows system is not activated notification. In the event that a license is not available, you simply need to purchase it. It happens that the previous series of the operating system was not activated, in which case you need to return to the previous Windows, activate it, and after that install Windows.

4 Clean installation from media

Windows 10 can be installed from media. This typical situation is an ISO image downloaded to a USB memory stick. Everything here is interesting, since Microsoft simply does not know about the fact of the transition from previous versions of operating systems to the new tenth. As you know, if you had Windows 7 or 8, from which the transition was made, then the right to the licensed version of the 10 series automatically remains with the user. But with a clean installation from USB, there is no such right, since the fact of having a license for previous versions has not been established.

Version 10 of the software will prompt you to enter a key or simply buy a new license for the software product. In this case, it is better to return to the previous version of the operating system and activate it. Next, you need to upgrade to Windows 10. When installing from a USB drive, do not click Install Now, as a clean version will be installed again.

5 Wrong version of the previous operating system

If error 0xC004F061 appears when activating Windows 10, it is possible that the required Windows series was not pre-installed on the computer. We remind you that version 10 of the software always requires either the 7 or 8 series of the operating system to update. If the hard drive is formatted, the update key also cannot be used. You will need to roll back to versions 7 or 8 again.

6 the computer was sent in for repair and a different OS was installed on it

There are organizations that independently install and assemble components. Operating systems are no exception to their work. As part of the repair work, they can easily install another version of Windows, which in its parameters will not be suitable for updating to the 10 series. They may also use a different product key during repairs, which will block the software if it is used on multiple machines.

It happens that the operating system is activated before assembly or repair work. Here you should enter the software key that was supplied with the components. If these steps do not solve the problem, then you can try reinstalling the initial series of Windows.

7 Operating system on multiple computers

In this case, the system displays error 0xC004C008. Here the activation procedure cannot work since Windows 10 is already registered somewhere. The license agreement sometimes does not imply the ability to install on multiple machines at the same time. So you will have to purchase new licenses to use the operating system or remove the software on those machines that are not used.

8 Using a used computer

We do not always have the desire to purchase new things at inflated prices. It also happens that you buy a used computer with software, but there is no key for it. You need to contact the person who sold this computer and ask him for a license key for the operating system. Often used computers use unlicensed Windows, so you may have to buy a new license.

9 Change of hardware

If you change any component on your computer, Windows will simply not be activated. The thing is that the software is tied directly to the hardware. Yes, manufacturers have to resort to such tricks to fight piracy. This rule applies to hard drives and motherboards. In this situation, you need to go through the procedures recommended by the software developers.

We hope the information on how to activate Windows 10 will help you.

(Visited 10,402 times, 1 visits today)

Windows 10, a popular operating system from Microsoft, requires activation from the user after installation, which is quite complex and multi-step compared to most proprietary programs. In particular, activation can be done through a phone call. Let's look at how to do this.

How to find out the activation key

First of all, to activate the system we need an activation key. As a rule, it is written on the back of the system disk or sent to you in an email during installation. If you don’t know it, it is recommended to use a simple program that analyzes the system and gives the user a key “hardwired” into it - for example, using the ShowKeyPlus utility. How to use it? Nothing complicated! Just run it and the utility itself will find all the data you need. ShowKeyPlus is free and open source. You can download it.

However, since the system is not activated, it means that you may not have a key at all. In this case, you must first obtain it from Microsoft and only then continue with activation.

Video: where to find the key

Activating Windows 10 by phone - step-by-step instructions

Once you have found out the key, you can begin the main part of the work - activation. To do this, you need to have a phone, a console, administrator rights and, preferably, a piece of paper with a pen in order to successfully write down the number dictated by the robot.

1. First you need to go to the console. This is done in several different ways: you can click “Run” (Win + R) and enter cmd in the window that opens, you can right-click on the “Start” button and select “Command Prompt (Administrator)” from the menu that opens.
2. In the console you need to type slmgr.vbs /upk. This way we will delete the old key. After this you need to enter the command slmgr.vbs /ipk<ваш ключ>, and enter the key without spaces, through hyphens, as it was originally displayed. To activate the system in the standard way, you can enter slmgr.vbs /ato. But this is not our case, and to activate via phone you will need another command.
3. A message will appear indicating that the key has been successfully installed into the system. Now you can move on to the next step: in the same command line you need to type the slui 4 command. It will open the phone activation menu. In the menu that appears, you need to indicate the country in which you live, and after that a window will appear with the data necessary for activation.
4. All that remains is to make a phone call. To a toll free number. Don’t worry: you won’t have to communicate with people, the activation is carried out by a robot, and all you have to do is press the buttons according to the given script:
   • press 1 if you are a private person;
   • press 1 if you want to activate Windows 10;
   • During the briefing, you can press # if you do not want to listen to it;
   • enter the first block of numbers from the activation window; then the second; then the third, and so on;
   • if everything went well, the robot will report that the data has been received.
5. The robot will begin to dictate the numbers of the confirmation code. If you type slower than you write, then this is where a piece of paper and a pen will come in handy. Carefully record the code and enter it in the appropriate field in the activation window (it’s called “Enter confirmation code...”).
6. "Ready!" - the system will happily report. That's it, Windows 10 is activated and you can do whatever you want with it.

Is this method safe?

In short, yes, it is safe. No more dangerous than any other type of activation. Of course, it is advisable to follow simple safety precautions: do not show the key or confirmation code to anyone, do not perform activation in public places, do not record calls or delete the recording immediately after activation. But objectively, the worst that can happen is that your activation code will leak onto the Internet and will be used to activate pirated versions of the system. If used for a long time, this can lead to the code being blocked and the need to obtain it again - this is not the easiest procedure. But it is impossible to gain any access to personal data or files on the computer through the activation code.

And if you follow the simple rules described above, the probability of code leaking into the network drops to such an insignificant level that it can be neglected. So activation by phone is secure and in some ways simpler than standard activation.

When it is impossible to activate the OS

The most common reason why activation by phone fails is the robot message: “The code is not recognized.” Why could this happen?

Video: getting a Windows license key by phone

So, activation of Windows 10 by phone is completed, and you can safely enjoy the system without restrictions and annoying inscriptions. In case you need to activate the system again, the experience gained will definitely be useful.

Windows 10 is a new operating system of the Windows family (and the latest edition, as Microsoft itself states) Many have managed to install it, and many are still thinking about it, because they are afraid of problems with further Windows 10 activation. In this article, I will tell all ways to activate Windows 10. Via Skype, using a key, using an activator
I won't talk about licensed software. Everyone decides for themselves whether to buy a licensed Windows 10 or activate it using other methods.

The first activation method is the easiest. If you have purchased the Windows 10 operating system (or a laptop with Windows 10 installed). Then you have either a disk with Windows 10 (on which the Windows 10 key is written) or you can look at your Windows 10 key on the lid of the laptop.

The most important thing to activate Windows 10 is to install the version of the purchased Windows 10. If you have Windows 10 Home, you need to install the Windows 10 home version, and not Windows 10 Pro. The Windows 10 key is suitable for both 32-bit Windows 10 and 64-bit versions.
Some desktop computers that are sold with licensed Windows installed also have a sticker with a Windows 10 key.


When you know your Windows 10 key, then you can start activating Windows 10. Right-click on This Computer — Properties and press Windows activation



Now enter your key and click Activate. If everything went well, your Windows 10 is activated

Activating Windows 10 using an activator

There are already many different activators for Windows 10 that will also make your system activated. Decide for yourself whether to use them or not.

Option #1. Re-Loader Activator

Re-Loader activator is an excellent and simple activator that will easily activate your operating system and make your Windows 10 activated
The Re-Loader activator can also activate installed Office 2007, 2010, 2013, 2016
Attention: For the activator to work you need to install .Net Framework 4.5
It is advisable to turn off the antivirus before using the activator. Launch Re-Loader

Select what you want to activate and click Active. 1 - Windows activation. 2-Office activation

Option #2. KMS Auto Lite

Kms Autolite is a popular activator from Ratiborus. The activator can activate both Windows 10 and Office 2016.
Now run the KmsAuto Lite activator

Select the products you want to activate and click activation

Activating Windows 10 via Skype

Only “selected” fans of Windows 10 know this method. Windows 10 can be activated by phone using Skype and a key found on the network. This method is quite time-consuming, but it makes your Windows 10 licensed, and forever.
First, you need to find a key that is not yet blocked and suitable for activating Windows 10. You need to check the key using the MsAct v 1.06 program
Download MsAct v 1.06 to check Windows 10 keys
Launch the program MsAct v 1.06 - Insert the key into the field— Install the key
If the key is suitable for activation in Skype, the program will display the following message:


Now let's call the number +3728002230 in Skype Microsoft. To activate Russian, press 2. Next, enter the Windows 10 key when asked.
Then the girl will dictate 8 blocks of letters and numbers. You must write them down on paper or in a notepad and then enter them in the MsAct v 1.06 program and click Apply code

Activating Windows 10 via Skype via Msact
After that, save the activation somewhere by clicking on the floppy disk

Conclusion

I described all the ways to activate Windows 10. The most correct way would be to purchase and install a licensed one, purchased in a store. Decide for yourself how you want to activate Windows 10. Here are the descriptions: SELECTED methods that do not contain viruses and will definitely activate your Windows 10
P.S: Look for activators on the Internet

Have you ever had to change computer components, but after that you were unable to activate the operating system? This guide will show you the steps you need to take to use the Activation Troubleshooter tool to reactivate your Windows 10 system.

When you make significant changes to your computer's components, such as changing the hard drive or motherboard, Windows 10 cannot correctly recognize your computer and the operating system becomes inactivated. Previously, if Windows 10 lost activation due to hardware changes, you had to contact Microsoft technical support to reactivate it, which was not an ideal solution.

Now Microsoft has simplified the process. Starting with the Anniversary Update in July, you can link a Microsoft Account (MSA) to a Windows 10 digital license on your computer. The new feature allows you to access the Activation Troubleshooter and reactivate Windows 10.

This Windows 10 guide will walk you through the process of linking your Microsoft account and digital license, and using the Activation Troubleshooter to reactivate your system.

How to link your digital license and Microsoft account

1. Open the Settings app.
2. Open the Update and Security section.
3. Click Activation.
4. Click "Add Account". (The account must have administrator rights.)
5. Enter your Microsoft account login and password and click “Login.” If your local account is not associated with a Microsoft account, you must enter the local account password.

Once you've completed this process, you'll see "Windows activated by the digital license associated with your Microsoft account" on the Activation page, so the linking was successful.

If you used a Microsoft account when upgrading to Windows 10, it was automatically linked to your digital license and you will see the message “Windows is activated by the digital license associated with your Microsoft account.” In this case, you can skip the previous step and move on to the next one.

How to use the troubleshooter to reactivate Windows 10

After linking your Microsoft account and digital license, you can use the Activation Troubleshooter tool to reactivate Windows 10 after replacing parts on your computer.

If you want to see other devices associated with your account, you can click “View other devices associated with your Microsoft account.” This page provides a list of devices in three categories (Edition does not match, Device type does not match, Windows is not activated), indicating the reasons why Windows 10 cannot be activated on other devices.

Additional Steps

If your device doesn't appear on the list, there could be several reasons.

First, make sure that you are signed in to the Microsoft account that you previously linked to your Windows 10 digital license.

If you are using a required Microsoft account, you need to consider the reasons why you are unable to complete the activation. Here is a list of possible reasons:

• Windows 10 was never activated on this computer;
• an unlicensed version of the operating system is used;
• the edition of Windows 10 does not match the edition associated with the digital license;
• the type of device being linked does not match the device type associated with the digital license;
• the number of re-activations is limited. If this number is exceeded, you will not be able to activate Windows 10;
• the edition of the operating system installed on your computer that is not Windows 10 Pro or Windows 10 Home;
• The computer is managed by your organization, in which case the reactivation tool is not available. You need to contact your system administrator;
• If you are unable to activate Windows 10 after using Activation Troubleshooter, you need to contact Microsoft technical support.

Conclusion

Since the first release of Windows 10, Microsoft has been working to improve the system, including its activation. However, activation problems continue to occur from time to time, so the new tool is designed to solve them and allow you to easily change computer components.

Activation Troubleshooter will become available in the Windows 10 Anniversary Update. Participants in the testing program can use the tool from build 14371 or later.

Obviously, you cannot reactivate Windows 10 after changing components without adding a Microsoft account to your computer. Troubleshoot is not available if the system is activated.

Microsoft has also renamed the Windows 10 key type from “digital entitlement” to “digital license”.