How to set up an Internet connection on Windows 8. Possible problems in setting up the Internet

How to set up internet on windows 8

In anticipation of the release of the Windows 8 operating system, almost all computer users had an increased interest in this system. Today this “operating system” is already available to us for use and many, without wasting time, are already on their computer and are slowly getting used to it. But as you know, the transition to a new system is always accompanied by new questions and problems for users with setting up those or other components. One of the most common problems that arise after switching to a new OS is, of course, setting up an Internet connection. In today’s article we will look at a detailed solution to this problem and learn how to set up the Internet in Windows 8.

Important: if you don’t know how to install this OS on your netbook or laptop, you can use.

Instructions for setting up the Internet in Windows 8

Since Windows 8 is not an absolute innovative system with complete automation of all processes, here we, as in previous versions of Windows, will have to install drivers for the modem, network card and other equipment. Installing drivers will be the first stage of setting up the Internet on Windows 8. After the driver installation has been completed and in the device manager you have verified that the equipment is working properly and is ready for use, then we proceed directly to the technical part of setting up the Internet connections in Windows 8.

So, first you need to go to the desktop by clicking on the corresponding button in the Start menu item:

After this, your desktop will open. Next, you need to find the network icon in the lower right corner of the desktop and right-click on it and select “Network and Sharing Center” in the menu that appears:

In the new window that opens, you need to click on the link “Set up a new connection or network”:

In the window that appears, you need to select “Internet Connection”:

In the next window, you will need to select the item “Create a new connection anyway.” By the way, if you are setting up the Internet on Windows 8 for the first time, then you may not have this item, but I have it because the Internet is already on my system configured and therefore the OS prompts me to create a new connection:

In the next window, select the only option available to us “High-speed (with PPPoE)”:

At the next stage, you need to fill in the “Username”, “Password” fields that were provided to you by your Internet provider to access the network. Enter them and click the “Connect” button:

That's it, the connection is now created. In order to get to the Internet connection icon in Windows 8, on the desktop, in the tray, on the network connections icon, left-click:

After this, you will see a side panel from which the Internet connection created for you will be available:

Possible problems in setting up the Internet

If you need to connect to the Internet via wifi from another computer or laptop, then first follow all the instructions specified in the article.

If for some reason you still were unable to set up the Internet, then you can ask your question in the comments below

Before setting up the Internet from Rostelecom on a computer with the Windows 8 operating system, you need to check the connection and settings of the network equipment. The ISP delivers Internet services in a variety of ways. The most commonly used connection is an Ethernet cord or a television cable, which requires a special modem. Users who have a telephone line can, which is very important for areas where other cables are not supplied by the provider.

Internet from Rostelecom on a Windows 8 computer

In order to proceed to setting up the Internet from Rostelecom on a computer with Windows 8 OS and other devices, you need to make sure that the network equipment is correctly configured.

Types of Internet connection used by Rostelecom:

• Ethernet cable connected to the apartment;
• ADSL connection via telephone line;
• TV cable;
• 3G, LTE networks.

Ethernet from ISP

When using an Ethernet connection from the provider, the signal can be sent directly to the computer’s network card. In this case, the Internet will appear without any settings.

If you plan to connect several devices, for example, a desktop computer, laptop and mobile gadgets (tablets and smartphones), then a direct connection will not work. In this situation, you need to use a router with combined modes (wired and Wi-Fi). To configure the router as a wired and Wi-Fi router, you need to change the hardware configuration. On most routers, parameters are entered using the web interface.

You can access it from any browser by entering the device’s IP address in the search bar. First of all, in the parameters we set the automatic distribution of IP addresses, which is most often enabled by default. In the wireless network settings, we create an access point so that mobile devices with a Wi-Fi module can connect to the Internet.

ADSL internet

If you use an ADSL connection or television cable, then in addition to the router you need to set up a modem. When connecting to the Internet via a telephone line, the user is given a card with data to activate the connection (they may also be in the contract being concluded).

This information is the key to your connection. The data is in the form of login and password for the PPPoE connection. They are entered into the settings of the modem or router with ADSL support. Further setup is similar to the access option via Ethernet cable.

TV cable

When accessing the Internet via television cable, setting up a modem in most cases is not necessary. Such devices have special firmware for the operator.

3G and LTE adapters of Rostelecom

To connect to the Internet using 3G and LTE networks, USB adapters or routers that support these technologies are used. If you connect USB modems to a computer connector, bypassing the router, you need to install the software included with the adapter to configure it.

How to connect Internet from Rostelecom to Windows 8

How to connect the Internet from Rostelecom to Windows 8 via Wi-Fi or cable depends on the computer itself. In most cases, it is recommended to use a wired connection, since many routers and adapters are not capable of providing full speed in Wi-Fi mode. Of course, when using Windows tablets, the connection can only be organized wirelessly.

In order to join the network and gain access to the Internet, you need to connect an Ethernet cable to the computer's network card. If on your router access is allowed only for certain IP addresses or their automatic distribution is not activated, then you will need to edit the connection settings in the operating system itself.

To do this, let's go to the network connections section and open the properties of the adapter we need. Here we select the IPv4 address parameters and manually set the IP, mask, and DNS server.

To connect to a network via Wi-Fi, in the lower right corner you need to select the Internet icon and click on it. After this, a list of all available networks will open in front of us. By clicking on the one you need, enter the password (if set) and wait for the connection.

Attention! When connecting to an access point, we recommend checking the Connect automatically checkbox. This will allow you to access the Internet immediately after turning on your computer, freeing you from having to search for a network and enter a password.

Error 651 when connecting to the Rostelecom Internet

On operating systems Windows 8, 8.1 and 10, error 651 may occur when connecting to the Rostelecom Internet. Problems are usually related to network equipment, for example, a computer's Ethernet adapter, router, or modem.

Several ways to solve the problem:

• restart the computer (this will restart network services that may have failed);
• re-create an Internet connection;
• use the function of returning the OS state to the previous version;
• reinstall the network card drivers;
• check the settings of the router and modem (perhaps their parameters were reset to factory settings after a power surge or for another reason).

Attention! If the error repeats on several computers and you are confident that the network equipment on your side is working, contact the Rostelecom hotline. The problem may be a breakdown of switches or other provider devices.

How to speed up the Internet from Rostelecom on Windows 8

Are you thinking about how to speed up the Internet from Rostelecom on Windows 8? There are several ways to do this. The most effective way is to purchase a faster package (you may need to replace the equipment). But if this is not possible, and the Internet has started to work much slower than before, it’s time to return everything to its original state. The only thing that can slow down the connection is traffic leakage.

Such a leak could be caused, for example, by your neighbor who found out the Wi-Fi password. Malicious programs can also “eat up” your Internet speed. In this case, an antivirus or a complete system reinstallation will help.

Setting up the Internet from Rostelecom on Windows 8 is simple, but if the connection is not made directly, you must check the parameters of the network equipment before making it. Problems that may arise during operation are most often resolved by reconfiguring network devices and installing drivers. To ensure optimal internet speed, be sure to set a strong Wi-Fi password and antivirus software.

Windows 8: how to connect to the Internet?

After the release of the Windows 8 operating system, many decide to install it on their computer or laptop. But after successful installation of this OS, there is a need to connect and configure the Internet. You can do this work yourself using the instructions below.

Connecting and setting up the Internet on Windows 8

To connect and configure the Internet on Windows 8, you must do the following:

1. Click on the "Start" button and select "Desktop" from the menu.
2. In the lower right corner of the desktop, find the "Network" icon and right-click on it.
3. A menu will open in which select “Network and Sharing Center”.
4. In the window that appears, click on the “Set up a new connection” option, and then select the “Internet connection” option.
5. A window will open where you need to select “Create a new connection”, and then click on the “High-speed” option.
6. In the window that appears, enter the name and password that were provided to you by your Internet provider, and then click on the “Connect” button. This will complete the procedure. To make sure that the network is working correctly and is ready for use, the “Network Connections” icon in the lower right part of the desktop will help you. By left-clicking on it, you will open a panel where it will be written that the created connection is available.

You may also find the information presented in these articles and sections useful.

The Windows 8 operating system has presented many new challenges to users. So, we should consider here such a point as connecting to the Internet. Of course, you can invite a specialist to make all the necessary settings. However, you can perform all the actions yourself.

Setting up PPPoE

In Windows 8, connecting to the Internet can be done quite simply. First you need. There are several ways to do this. So, move the mouse to the lower left corner until the Start icon appears. Right-click on it and select Control Panel from the list. The second way is to use Explorer. To do this, click on its icon and select Desktop, then go to the Control Panel.

In this section we need to select Network and Internet. In the window that appears, select Control Center. Now follow the link Create a new connection. After that, click on Connect to the Internet and confirm this by clicking Next.

If you already have a connection created, a window will appear in front of you where you will be asked to start browsing the network or create a new one.

Click on the last option. Now you need to set the settings correctly.

Select PPPoE technology, fill in the login and password. You will also need to enter the name of the connection, this is done in Latin letters. Click Connect and wait for the action to start. If everything is done correctly, the computer will connect; you can find out about this by clicking on the icon indicating the status of the connection to the network.

However, sometimes you may need to perform additional steps. So, this is necessary if a window appears in front of you, informing you that the connection has not been established. In this case, click on the link below, which indicates that you still want to establish this connection. After that, click on the Close button. After completing these steps, you must return to the Control Center section.

On the right side, select Change adapter settings. Here we find the connection we created and right-click on it. From the list that opens, select Create shortcut and send it to the Desktop. Click OK and be sure to do it. Then we check the connection again by clicking on the created shortcut and starting the connection to the network.

Creating a VPN connection To create a VPN connection, go to the Network Control Center.

Enter your credentials. After this, a pop-up window will appear with a list of connections. We select what we created and launch it. The authentication window will now open. In it you will need to enter the data specified in the agreement with the Internet provider, in particular your login and password. If you return to the Control Center, you can change other connection characteristics, create a shortcut for it in a convenient place, etc.

As you can see, the process of creating a connection cannot be called particularly complicated. You need to do some simple manipulations and enter some data. However, keep in mind that depending on the type of connection, its settings, as well as the features of creating a connection, may vary. If we talk about the Internet browser that will be used to view pages, then you can choose it to your own taste. Read more about the advantages and disadvantages of different browsers. For 8, we recommend Internet Explorer no earlier than version 10, since the previous ones may not work very correctly.

Installation and configuration ADSL modem usually carried out by the provider's technical support service. But you should know how everything works in case you ever have to set it up yourself.

Special digital device ( ADSL splitter), usually included as standard, is connected to the telephone line. A regular telephone and an ADSL modem are connected to the ADSL splitter using a simple telephone cable. In turn, the ADSL modem is connected to the computer using a piece of Ethernet cable (twisted pair), also included in the package.

The connection diagram is shown in the image below.

After connecting the modem to your computer, simply turn on its power - you don't have to install any drivers. For an ADSL connection to work, you only need one driver, which is usually already installed - the network card driver.

  Why doesn't an ADSL modem need a driver? Technology ADSL(like some other technologies, for example, Radio Ethernet), uses the protocol PPPoE (Point to Point Protocol over Ethernet). A regular modem connection uses the protocol PPP (Point to Point Protocol), right here PPP frames transmitted over the network card ( Ethernet) - this technology is implemented by the protocol PPPoE, so we don’t need any additional drivers.

Once the ADSL modem is connected to the computer, you can begin setting up the ADSL connection. Usually its setup occurs without any difficulties. Make sure that your DSL modem is turned on, open the window, to do this, right-click on the network activity icon in the notification area on the taskbar and select the command in the context menu that appears Network and Sharing Center

  Your ADSL modem can operate in one of the modes: ( bridge) or router ( router).
  IN bridge mode An ADSL modem is just an “adapter” between the communication line and your computer and is not endowed with any intelligent functions - it simply transmits everything that the computer sends to the communication line. In the opposite direction, the principle is the same - everything that comes in is sent to the computer, and it itself figures out what to do with this data. And setting up an Internet connection for bridge mode is done on the computer: you need to create a connection, specify a username and password, establish a connection, etc. (will be described later).
  IN router mode The connection is configured in the modem control panel. It is in the modem settings that the username, password, and some other connection parameters are indicated. There is no need to configure your computer. A modem operating in router mode can simply be connected to a computer with a cable.

  The following describes only the first configuration method - using Windows.
  And you can find the second method in the manual for your modem. The setup process differs depending on the modem manufacturer and even on the modem model - there may be different firmware, etc.

In the window that opens Network and Sharing Center select team Create and configure a new connection or network

In the connection options selection window that opens, select Internet connection

If someone (perhaps not you) has already set up an Internet connection on this computer, the system will prompt you to either create a new connection (option), or select an existing connection and Start browsing the Internet.

Select the option: Create a new connection anyway

In the next window we indicate how to connect to the Internet. Since we are setting up an ADSL connection, we should select the option: High speed (with PPPoE).

If we are interested in other types of connections (for example, Dial-up), you need to check the box Show connection options that are not configured for use.

Now enter the username and password provided to you by your ISP and also check the box Remember this password, so as not to enter it every time you connect.

If you have someone else working on your computer besides you (meaning your own accounts) and you want to allow them to use your connection, check the box Allow other users to use this connection. It is not necessary to change the connection name.

Click the button To plug, and Windows will establish a connection to the Internet.

To make it easier to connect to your configured network, open the sidebar Charms Bar, select Options | Networks And TestNetwork(you will have your own network name) from the list shown to you.

Usually there is a server running on the provider side DHCP (Dynamic Host Configuration Protocol), which automatically assigns our node an IP address, network mask, IP addresses of DNS servers and transmits other information related to network configuration. That's why all that is required to set up a connection is a username and password. But you should still know how to configure the connection manually (without DHCP) - just in case.

Open Network and Sharing Center, select Change adapter settings,

Right-click on the connection whose settings you need to change, and in the context menu that appears, select Properties

The connection properties window will open.

In most cases, IPv6 is not yet used at all, so disable it. Select Internet Protocol Version 4 (TCP/IPv4) and press the button Properties

In the window that opens, set the switch to Use the following IP address and enter the IP address provided to you by your ISP. Then select Use the following DNS server addresses and specify the preferred and alternate DNS server addresses. Click the button OK