Online services and programs for combining photos into one. How to combine two photos into one without Photoshop will help to combine photos into one online

Good day to all, my dear readers! As always, Dmitry Kostin is with you, everything is unchanged here). I see that many people are interested in how to combine two photos into one in Photoshop. It just happens that people want to make a comparison, like BEFORE and AFTER, or something else.

You've probably seen that when people post their weight loss achievements, they also post BEFORE and AFTER photographs combined into one. By the way, I did this too when I wrote. In general, today I will show how this can be easily done. So crack your fingers and let's go!

I wanted to tell you the fastest way, but I decided that it was not worth repeating, since I already talked about it in the lesson about. It will turn out that you will have one photo inside another. Let's focus on other ways.

Combining two images

In this example, I decided to do a “Before and After” style photo merge. Don't tell me that these people are not alike. These are two different people). In general, open two photos in Photoshop, and then proceed in order. I took photos of two people: thin and ripped.

1. First, let's make the images the same height. To do this, being in each photo separately, go to the “Image” menu - "Image Size". Look at the number of pixels in height. It turned out that the thin one has 680 pixels, and the pumped one has 1329.
2. In this case, it is better to reduce the size of the uploaded image to 680 pixels in height in order to make them equal and not lose quality. Do you know how this is done? If not, then look at my article about (although everything should be clear anyway). And by the way, remember the horizontal size of the image of the jock. I got 487.
   
3. Now go to the photo of the skinny woman and go again to the “Image” menu, only this time select “Canvas Size”. Here we will simply enlarge the work area without enlarging the photo itself. So the horizontal size of the skinny photo is 453 pixels. We mentally add 487 pixels (the horizontal size of the jock’s photo) and get 940. It is this number that we write in the width cell. We do not change the height and leave it at 680.
4. Now we need to choose which side these new additional 487 pixels will appear on horizontally. If we leave it as it is, the canvas will increase in both directions by 243 and 244 pixels (487/2). But we want to do “Before and After,” which means the thin one should be on the left, therefore the empty piece of canvas on the right. Then in the location, click on the left arrow so that the center moves to the left. You can also choose the background color, but in our case this is not necessary, any will do, since we will close it anyway. Then click OK.
   
5. Do you see? Now we have a huge piece of white background. Now go to the photo of the beefy guy, take the Move tool, hold down the left mouse button on the photo and drag it to the tab with the photo of the skinny guy.
   
6. It's a small matter. All that remains is to move the photo directly onto the white background. We accurately calculated the width and adjusted the height, so that everything should stand exactly.
   

Here's a simple and easy way to combine two images).

Merge with smooth transition

There is another interesting effect when the transition from one photo to another is smooth. Let me do this using the example of two animals: a lion and a saiga.

1. Open the image of a lion and a saiga in our editor, but in different tabs.
2. Go to the lion layer and select .
3. Now select and make sure that the transition is from black to white. And now draw a line with this gradient approximately in the middle, as shown in my picture.
   
4. Your part of the image with the lion should be painted over with a red tint. Great. This is what we need. Now look at the Layers panel and our active lion layer. Is he the main one? Those. Is there a lock on it? If yes, then left-click on it to make it disappear, otherwise we simply will not be able to edit this layer.
   
5. Now remove the quick mask mode by clicking on its icon again. You should have part of the image highlighted with a dotted line. After this, press the key DELETE and make sure the content is worth it "Content-Based", then click OK. The right side of the image should be removed, and with a smooth transparent transition. Just deselect it (just click once with any selection tool, for example a rectangular area).
   
6. Now go to the tab with the saiga (damn, it’s still a funny animal and name). It is advisable to equalize the height (in pixels) of these two images, as in the previous example. Now we take the “Move” tool and drag the poor saiga straight to the lion.
   
7. And now the trick (just kidding, of course it’s not a trick). We hold the layer with the saiga in the layers panel (poor animal, we are holding it again) with the left mouse button, and then drag it down so that it is below the lion.
   
8. Do you see what happened? The king of beasts and the antelope are combined into a single photo. Cool! You can move the antelope a little using “Move”. Let's see. The smooth transition was a success. In my opinion it turned out quite well. Cute and relaxed.
   

Well, in general, something like this.

Of course it's photoshop. And there are many more ways to combine several photos into one. But I think that these methods will be quite enough for you to start with. Moreover, in the last version we didn’t just link 2 photos into one, but made a simple collage, i.e. We use several different images in one.

By the way, if you want to make amazing collages, then I highly recommend you check out excellent course on this topic. Many examples are examined in detail. From a few simple images you will learn how to create masterpieces, so go ahead!

Best regards, Dmitry Kostin.

Sometimes there is a need to combine two photographs or pictures into one. For many photography enthusiasts, combining photos into one is perceived as something difficult and incredible. But finding a way out of the situation is not at all difficult. There are many online applications for this purpose on the Internet, and most of them are quite friendly for novice users.

Let's look at one of the simplest and fastest online editors, how to combine several photos into one.

And we upload our photos, or the pictures that we want to combine.

I took two photos (sources that I will combine.)

1. First, we determine how we will connect the photographs vertically or horizontally. I connect vertically, so I leave the first setting as is.

2, Since pictures or photographs can be of different sizes, we put them according to the one we want to see our photo at the output. (For a larger photo, or a smaller one, or leave different ones.) The default is automatic sizing

3. Then we crop the pictures, if necessary. In my photo, I placed the crop of the first picture on the RIGHT, and the second on the LEFT. So that the images are closer to each other.

4, Each of the pictures can be mirrored.

5, And according to your desire, you can optimize the size of each picture.

Then enter the image format and click OK.

After clicking OK, an additional sign will appear. In the additional plate that opens, select what you need. You can immediately SAVE the picture, or view what happened.

If you are not satisfied with something, go back and make new settings.

To combine 3 photos into one, first combine the first two, and then the two combined ones need to be combined with the third. In this way you can make one picture out of three, four, five and so on.

This is how you can quickly and easily combine photos into one.

The question of how to combine two disks into one is one of the most frequently asked among computer users. This can be useful in many situations, including even issues related to installing a single file system for all partitions, converting GPT or RAW formats that may not be accepted by the operating system, installing software that requires a lot of disk space, etc. The user can be offered two main methods of combining, which will be discussed further in as much detail as possible. The proposed solutions work equally well when performing such actions with logical partitions and when working with RAID arrays, when two or more independent hard drives are installed on the computer.

Benefits of combining hard drives or partitions

It goes without saying that the first and main factor influencing a positive decision in favor of merging partitions is increasing the available disk space on one disk, which is extremely necessary when installing some programs.

On the other hand, as already mentioned, if different types of file systems are installed on disks or partitions, it is quite common to observe problems with the installation of certain types of software. Bringing them, so to speak, to a common denominator eliminates the problem entirely. Finally, if the system has unreadable RAW partitions or the GPT format for hard drives larger than 2 TB, which the operating system may not perceive, such a tool is simply irreplaceable.

Merging options

Now a few words about how to combine two disks into one in Windows 7 and higher. First, you need to decide exactly how the partitions will be merged. First of all, we can highlight methods of combining with the loss of information or its preservation. The second is the use of standard system tools or third-party software.

It’s worth saying right away that the solution to the question of how to combine two disks into one, using the built-in Windows tools, does not imply the preservation of data that was originally located in one of the partitions (this is not provided at all). Therefore, before doing such things, all information from the partition being deleted (and it will actually be deleted and only then attached to the main disk or partition) must first be transferred to another partition or to removable media. As is already clear, there is no need to talk about the performance of installed programs. When solving the problem of how to combine two disks into one, but so that both the information is preserved and the applications work, it is necessary to use additional third-party tools. They will be discussed separately.

How to merge two disks into one in Windows 7 and higher versions using standard means?

First, let's look at the system's own tools. This is the disk management section. You can access it through the administration menu, but it’s easier to use the “Run” console, in which you need to enter the line diskmgmt.msc.

Here you select the partition through which you want to merge, and use the RMB menu to call up the volume deletion option. The system will immediately issue a warning that all information on the selected disk will be deleted. We agree.

We repeat a similar operation, but for the section. After this, the so-called unallocated area will appear.

Now you need to use RMB on the partition to which you will attach and select the volume extension line.

At the disk selection stage, most likely, free attachable space will be immediately added to the list. If this does not happen, you should use the add button yourself. After this, click the continue button, and in the next window - finish. If you look at the state of the disks and partitions after the operation is completed, you will see an increase in the space of one of the partitions at the expense of the other.

How to merge two disks into one using third-party programs

To manage disks and partitions, when you need to merge and save data, you can use third-party utilities, which seem much more powerful than the system’s own tools. These include software packages like Partition Assistant from AOMEI, Disk Director from Acronis, Partition Master from EaseUS and many others.

Let's look at the merging process based on the last mentioned utility. For example, we need to merge drive E and drive F, but so that after that only one partition E remains. In the main window of the Partition Manager section, use the merge button (Merge), check the boxes for the specified disks (partitions) and click the “OK” button. After checking the merge, the process will be in pending status. Click the Apply button and confirm the action. After this, the unification process will begin.

When it finishes, only one partition (E) can be seen in disk management. Explorer will show two hard drives in one hard drive or partition. Only drive F in partition E will be shown as a local directory (Local Disk F) with all the information that was previously present on it.

Brief conclusions

As a summary, it can be noted that if the user requires a quick merge, but there is no critical information on the attached disk or partition, you can use the system's tools. If data storage is mandatory, third-party programs will be needed. And further. Please note that if there is a second operating system on the combined disks in the attached partition, it will not be possible to run it.

It’s not at all difficult to make one photo out of two—several dozen services have now been created for this. In some of them this is the main function, in others it is a secondary one. Today we will tell you on which sites you can perform this simple action in just a few minutes.

: combining several photos into one is easy!

Pixlr has a huge range of useful photo editing features

IMGonline: how to take 2 photos in one online

The IMGonline service is a real storehouse of useful functions for photo processing. It contains many tools for color correction and image enhancement, as well as applying interesting effects. Despite all the power of the site, its design is very primitive, but you can use it even from an old mobile phone with Internet access.

To merge photos, in the “Tools” tab, you need to select the “Merge two pictures into one” function or just click here.

Don't be intimidated by the large amount of information on the page. If you just need to combine 2 photos without editing them, then the proposed settings will not be needed

We perform the following three steps:

• Upload the required photos.
• We note the orientation of their location (vertically or horizontally) and, if necessary, adjust the remaining parameters of the combination. Here you can rotate, crop or flip your photo, although this is not very convenient and not at all clear.
• Select the format of the finished image (jpg or png-24).

Click the “OK” button.

Next you will be prompted to open or download a ready-made association

will help you combine photos into one online

is another very easy to use but feature-rich photo editor. To make one photo out of two, you first need to upload them one by one to the site. To do this, in the “Files” tab, select “Upload from disk” or “Upload from Vkontakte album”. Then click “Operations” – “Edit” – “Merge several photos”.

Please note that the pictures are loaded separately: first the first one, and then the second one in exactly the same way.
Here you can normalize the size of the pictures relative to each other

If you are satisfied with the finished gluing, click “Accept”; if not, click “Cancel”.

You can work further with the result obtained or save the image to your computer or VKontakte.

Do you want to make the association original? For this, Cropper offers a whole archive of decorative photo frames, as well as the ability to create a colored or dynamic frame.

It is convenient to select images for editing from a special panel on the left

As you can see, all the proposed services can combine two photos into one online equally well. However, each site has its own characteristics, additional functions and capabilities. Which of them do you prefer - decide for yourself.

In this Photoshop tutorial I will tell you how to glue two photos into one, this method is quick and easy to understand.

1. Let's start by opening the required number of photographs that we will glue together. I chose two photos that I took last year in Toronto. First, we need to open several photos in one window. To do this, open them separately in Photoshop (each has its own window). Then in one of the windows, right-click on the photo, select Duplicate layer, and in the window that appears, select the document with our second photo from the drop-down list.

2. Using the Move Tool (V), place the pictures on the same level. We combine them the way you would like to combine them.

3. Now we need to select the top layer and click on the Add Layer Mask icon:

4. To make the process easier, move the top layer down a little (again, Move Tool). This will help us determine the gradient length for the mask later.

5. Select the gradient tool (Gradient Fill) (G). The gradient settings should be like this (top panel)

6. Then click on the edge of the top picture (see picture), hold down the Shift key, and draw a horizontal line from the beginning of the top picture to the end of the bottom (everything is clear in the picture).

7. It should look something like this:

8. To make it sharper and more noticeable, just make the gradient line a little shorter:

9: Here's what I get:

10. Now let’s put the pictures back together by lifting the top

11. Well, that's all, all that remains is to merge the layers, but this is not necessary. The simplest effect.