How to turn on a disk on a computer. How to open a disk and flash drive on a laptop. The drive won't read the disc

Instructions

The easiest way to watch a DVD is to use the standard Windows Media Player. Insert the disc into the drive of your personal computer. Press the button to close the drive. Go to Start - All Programs and open the Windows Media Player application. In the dialog box that appears, in the upper left part, click on the “File” link, then “”. Specify the exact path to where the DVD is located. But this program cannot always read digital signatures and disk encodings.

More reliable and complete software is CyberLink PowerDVD v 11.0.1620.51. Purchase this version of the licensed program from a specialized store. PowerDVD can read all formats, such as MPEG (AVI, MPG, MPEG, MP2, MP3, M1V and M2V), QuickTime (MOV and QT), MIDI (MID and RMI), audio (Dolby AC3, WAV, ASF, WM, WMA, WMV).

Insert the disc into the drive of your personal computer. Close the drive. The program installation dialog box will open. Specify the location where the program will be installed. Click Next. When the process is complete, reboot your operating system for all changes and updates to take effect.

You can also watch the DVD using Media Player Classic Home Cinema. Download the free K-Lite Mega Codec Pack 7.7.0. Install this software on your personal computer. Go to “Start” - “All Programs” and launch this application. Click on the “File” drop-down list and specify the exact path to the DVD. Start watching.

When a user purchases a new optical drive to replace the old one, he inevitably faces the problem of installing it inside the system unit (unless, of course, the drive is external). Fortunately, today this operation is simple and quick.

Instructions

Free up the selected compartment by removing or breaking out the plug on the front panel of the system unit case.

Insert the drive into the free bay and secure it with screws or latches (some cases may require additional “slides” to be installed on the drive beforehand).

Connect the power and data cables (IDE or SATA) to the drive.

Close the computer case and turn it on.

Video on the topic

When working on your computer every day, your hard drive can be filled with information. In order to free up free disk space, you need to clean up the old hard drive or purchase a new hard drive. As a rule, cleaning the hard drive does not help for long. The ideal solution is to buy a new drive. But what should you do if you haven’t installed hard drives?

You will need

• IDE hard drive, system unit, “+” screwdriver.

Instructions

After you purchase a new hard drive, it must be kept at room temperature for 20 minutes. Connecting a storage device means it heats up quickly. And a sharp jump in temperature can have a bad effect on its operation. At high temperatures, the hard heads move slowly. Therefore, in summer, just like in winter, it is necessary to let the device sit.

First, you should turn off the power to your computer. Disconnect all power wires and remove them from the “pilot”. After this, turn the back of the system unit towards you.

Arm yourself with a screwdriver. Remove all connecting screws. Remove the side walls.

Get your hands on a new hard drive. Please note that the back side of the information storage device includes three connectors: power cable, jumper connector, data cable. At this point you should be interested in the jumper connector. You already have the main disk. Accordingly, you will have an additional disk. Since you have 2 hard drives, you need to know which of these 2 drives is the main one (Master) and which one is the additional one (Slave).

Face the hard drive so that the front side is facing you. There will be a sticker on the disk with an illustration that will tell you how to connect the jumper correctly. After installing the jumper, you can proceed to connecting the disk.

Insert the drive into an empty slot. Most often, the free slot is located above your main drive. Connect all connecting cables, focusing on your old one. You won't be able to insert it incorrectly. Connectors and cables are made in such a way that they are connected only in position.

After this, you can turn on the computer, go into the BIOS and check that the connection is correct. If all disks have been found and identified, you can turn off the computer and then assemble the system unit.

Sources:

• Why do you need to know how to properly connect a hard drive?

If you need to read the information on a flash card, you can do it on any computer. Please note that when working with a flash drive, there are a number of features that will help you secure your computer, as well as the information stored on the flash card.

You will need

• a computer equipped with a USB port,
• flash card

Instructions

Getting started with a flash card. Today there are two types: with a USB 2.0 interface, and also with a USB 3.0 interface. To read each type, the computer must be equipped with the appropriate ports. To get started with a flash card, you just need to insert it into one of your computers. After inserting the device into the connector, do not rush to view the information stored on it. The flash drive may be infected with a virus.

To check the flash card for viruses on it, you must ignore the autorun window by clicking the “Cancel” button. Next, you need to open the “My Computer” folder. In this section you will see an icon that will look like a removable disk. Click on this icon with the right mouse button. If you have an antivirus installed on your computer, you will see the “Scan for viruses” option in the menu that opens. Click on this command with the left mouse button, and then wait for the media check to finish. If the flash drive is infected, it is not advisable to continue working with it on your personal computer. If the card does not pose a threat to the PC, you can start working with it. To do this, you need to double-click on the removable disk icon that appears in the “My Computer” folder.

If you do not want to damage the information recorded on the card, after finishing working with the flash drive you need to properly complete the process. To do this, right-click on the device shortcut displayed in the tray. In the context menu, select the “Safely Remove Hardware” command. As soon as the system notifies you that work with the device has been successfully completed, remove the flash card from the slot. This way, you will not damage files and documents stored on the card.

Today, a variety of materials are distributed on DVDs, from movies to Linux distributions. If your computer has a drive that does not support this format, you can replace it with another that supports it.

Instructions

Select a drive based on the following considerations:
- what computer it is intended for: desktop or;

What interface does the old drive use: IDE or SATA;

Should it be able to write DVDs or only read them?

Should it be internal or external.

Connecting an external drive is the easiest way. Just plug it into any free USB port. If it will work in conjunction with a laptop or netbook, be sure to use a USB hub with its own power supply. Such a drive will not work in DOS.

To install the built-in drive into your computer, first turn off the power to it. Disconnect both cables from the old drive, remembering how they were connected. Remove the screws and pull in the old drive. On the new drive, if it is an IDE drive, move the Master-Slave-Cable select jumper to the same position as on the old one. Insert the new drive, secure it, and then connect both connectors in the same way as they were connected to the old one.

Before installing the drive, the laptop requires not only de-energizing, but also removing the battery. Using a special latch (or two such latches, depending on the design of the machine), disconnect the special cassette with the drive. Remove the four screws and then pull the drive out of the cassette. Insert the new drive and secure it with the same screws. Place the cassette with the new drive in place. Make sure it is secured with the latch (or two latch) again. It is impossible to install an optical drive in this way.

If it has been upgraded, reinstall the battery. Turn on the machine and check if the new drive works. Try and burn two or three media of each supported format to make sure that the drive is fully functional.

To connect an external device designed to operate via a USB port to a computer as a second hard drive, you just need to insert the connecting wire into the appropriate connectors on the bodies of both devices. The process of installing a stationary hard drive as the second main drive in the system unit of your computer is more complicated. The sequence of actions for this option is described below.

Instructions

Shut down the operating system, turn off the computer, and disconnect the network cable. Position the system unit in such a way that you have free access to both of its side surfaces.

Remove both side panels. As a rule, to do this, it is enough to unscrew two screws connecting them to the rear panel, and then move them back 5 centimeters and put them somewhere not very far.

Install the new hard drive into one of the free slots in the case. Do this carefully so as not to accidentally disconnect the wires, which are abundant inside the case. The connectors for connecting power should be on the motherboard side, and the hard drive is secured with four screws - two on each side of the system unit case. Use an already installed hard drive as a sample for placement and fastening.

Connect the power cable and data cable (“cable”) between the new hard drive and the motherboard. These wires differ depending on the type of hard drive being installed (IDE or SATA), but in any case, their connectors are asymmetrical in shape and the connectors can only be inserted in one way, so you cannot make a mistake. An already installed hard drive will help you find the necessary slots on the motherboard - the connectors you are looking for should be located next to those used to connect it. On hard drive cases that use the IDE bus, there are jumpers that are used to establish a hierarchy of disks installed in the computer - one of them must be designated as primary, and all the rest as secondary. However, in most cases there is no need to use them, since the BIOS is able to figure out the device configuration itself with the jumpers set by default.

Make sure that you have not damaged anything inside the system case during the installation process or forgotten any tools in it. Do not rush to close the case - you should first check the result of the operation performed. Connect all the necessary wires, the last of which should be the network cable. Then turn on your computer and go into the BIOS settings to make sure it can recognize the new device. After this, turn off the computer and replace the side surfaces of the system unit.

Sources:

• how to connect a disk to a computer

Once you learn how to independently install programs from a disk onto your computer, you will stop wasting money on calling a system administrator and will be able to handle any program yourself. In addition, program developers make their products so that even a beginner can install them.

You will need

• - computer;
• - a program recorded on disk.

Instructions

First of all, insert the disk with the program into the computer drive with the mirror side down and the matte side up. You may be prompted to enter or confirm your administrator password in a window that opens. If you know the password, enter it and confirm.

If you want to install the program on your computer manually, then open and run the installation wizard file Install.exe or Setup.exe. In the first two windows you will see information about the program itself and the license agreement. After reading the material, click on the “Next” button. Often, in order to continue with the installation, you will need to check the “I agree to the terms of the agreement” box. Depending on the type of program, you will see a special form in which you fill in the required fields.

Next, find drive C and make sure there is free space for the downloaded program. Set the default program to C:Program Files. If drive C is busy, then click on the “Browse” button and select another drive.

If you want to create a quick launch shortcut or a desktop shortcut, select this line in the new window that opens and click on the “Next” button. A window will open in front of you where you can see the installation of the program, with a performance scale in percentage. Once it is installed, click on the “Finish” button. After this, your program will be completely installed.

Check on your desktop for a shortcut to the program you just installed. If you don’t find it there, then go to the Start menu. The installed program will definitely be displayed in this menu.

note

Be careful when purchasing discs with programs from unverified resources, as they can be used to introduce a virus into the system.

Helpful advice

If you do not want to manually install the program, then use the Installation Wizard installation package, which allows you to install programs of additional complexity.

Modern users require more and more hard drive space to store information. Many solve the problem by connecting additional hard drives to the computer.

You will need

• - Internet access.

Instructions

Determine the type of hard drive that is suitable for your . Study a paper copy of the instructions for the motherboard or look at the necessary information on the official website of the manufacturer of this device. Modern computers are equipped with a SATA slot, through which the motherboard and hard drive are connected.

It is worth noting that some motherboard models connect DVD drives via the IDE port. This makes it possible to use this channel to connect the motherboard to the hard drive. Open the cover of the system unit and find out the presence of certain ports. The IDE slot is a thin wide cable, and the SATA slot is a small wire with a small rectangular connector.

Buy a new hard drive. You should not choose a hard drive with a capacity of more than 500 GB unless you are sure that your motherboard supports relatively new hard drives. Information about this can be obtained on the website of the manufacturer of this motherboard model.

Turn off your computer and unplug the AC power cord. Connect the new hard drive to the selected connector. Turn on your PC and hold down the Delete key. After opening the BIOS menu, go to Boot Device. Find the Boot Priority section and open it. Install your old hard drive next to First Boot Device. This is necessary for the operating system to boot successfully.

Press F10 to restart your computer while keeping your settings. After the operating system has finished loading, wait until the new hard drive is detected. Completely format it. This will ensure stable operation of the device, saving you from possible troubles associated with data loss. Partition your hard drive if necessary.

The drive won't read the disc

If you encounter a similar problem, then most likely the problem is a malfunction of the optical drive you are using. For example, you put a CD in the drive, and it just spins it, but nothing appears on the screen. There are several most common reasons why this can happen. Most likely, the drive has simply become unusable and it is time to replace it. Fortunately, such a replacement will not hurt your pocket too much, and finding a suitable device will not be difficult. Of course, there is no need to write off your disk drive ahead of time. First you need to understand the problem.

Troubleshooting

For example, if the user is using virtual disk managers, then most likely the problem lies with them. Quite often it happens that such programs conflict with the optical disc drive and as a result it refuses to work. Sometimes users create too many virtual drives, but do not know how to delete them correctly, and by mistake they can delete the drive itself from the system.

In addition, you can check the drivers for the drive. In order to find them, you should open the “Start” menu and go to “Control Panel”, where select “System”. A fairly extensive list of parameters will appear here, among which you need to find and select “Hardware”, and then “Device Manager” in the menu on the left. In the window that appears, you need to find the item “IDE ATA/ATAPI controllers”. Here, using the right mouse button and the “Delete” button, eliminate absolutely everything. After that, restart your computer and everything will be fine.

Sometimes the problem may be in the cable that connects to the motherboard and drive. In order to check its serviceability, you should buy a new one at a computer store (fortunately, it costs about 200-400 rubles) and install it in place of the old one. It is worth noting that when installing a new cable, you need to carefully inspect the connection connectors and make sure that it will stand where you need it. Otherwise, you can throw not only the purchased cable into the garbage disposal, but also the drive itself, as it will simply burn out.

If none of these methods work, and the drive still does not read a working CD, then this means that its service life has expired, and you will need to buy a new one. In most cases, the drive's board breaks or it simply burns out on its own.

Typically, when a CD or DVD is inserted into an optical drive, the personal computer automatically reads the contents of the media and the function is turned on. autostart, it’s called like this: Autorun.

In addition, today the autorun function on computers works not only with CDs or DVDs, but also with USB devices, such as USB drives (flash drives), digital cameras, etc.

But sometimes Autorun does not work. And this scares many, but there is nothing scary about it. The Disk Autorun function is customizable and can be enabled or disabled independently in the computer operating system.

The Autorun function allows you to reduce the user's time to launch media content. The computer automatically detects file formats and selects the desired program or opens a context menu and prompts you to select the desired action.

Setting up Autorun is very easy. Let's say you want to configure this function to automatically launch CDs or DVDs. Open the folder: My computer, choose: Properties and go to the tab: Autorun.

A menu will open in front of you with a list of actions that you can choose. Moreover, this list may be different, depending on the installed programs on different computers. Here's what one of the options for such a menu looks like:

From the drop-down list, select the type of files recorded on a CD or DVD disc. It's better to set the parameter: Mixed content, because The discs come across different types and it is usually impossible to say in advance what is recorded on the disc.

And choose the action you want to perform. Then press the buttons: Apply, OK and the Autorun function will work without your participation. Those. After inserting the disc into the optical drive, you will be prompted to perform the desired action.

But there is one more point here: in order for the disc to play automatically, a file must be written in the root folder of the disc: Autorun.inf. Naturally, this file is created by the disk developers. But if you independently prepare a disc with some information for recording, then creating such a file is easy.

Create a text file in a regular notepad and give it a name: Autorun.inf. Open the file in any editor, for example in Notepad, and write the following code into it:

open=setup.exe
icon=cd.ico

The first line "tells" the computer to run the autorun function. The second line “says” that the file needs to be executed setup.exe, which should be in the root of the disk (or some other file you need), the third line gives the command to load the icon (you can do without it).

In exactly the same way, you can configure autorun for other devices that you connect to your computer, for example, any removable USB drive. Select this device in the menu: My computer, Properties, Autorun and configure the execution of the desired action.

This is what the autorun menu (list of suggested actions) may look like, depending on the programs installed on the computer:

Sometimes users deliberately disable the autorun feature to avoid infecting their computer with viruses. The fact is that in the same file Autorun.inf You can also write other commands that trigger the installation of malicious code. The virus can be recorded on a disk or downloaded from the Internet.

Therefore, if you doubt the origin of the disc, it is recommended to view the file Autorun.inf before automatic installation. It's easy to do. Cancel automatic installation of disk contents, find the file Autorun.inf and open it in any editor, such as Notepad. To start the disk normally, only 3 lines of code are enough (see above).

If you find something else in this file, especially links to resources on the Internet, then most likely such a link will download a virus or malicious code to your computer.

To disable autorun, it is best to edit the registry. To do this, go to the registry editor ( Start/Run/ team: regedit), find the following registry keys and set the following values:

Key:

ParameterAndmeaning:
"AutoRun" = 0

Key:

ParameterAndmeaning:
"NoDriveTypeAutoRun" = ff

Key:

ParameterAndmeaning:
@="@SYS:DoesNotExist"

Key:

AutoplayHandlers\CancelAutoplay\Files]
ParameterAndmeaning:
"*.*"=""

When the need arises to use autorun, then you need to change these keys in the registry as follows:

Key:
ParameterAndmeaning:
"AutoRun" = 1

Key:
ParameterAndmeaning:
"NoDriveTypeAutoRun" = 0

Key:
ParameterAndmeaning:
@=""

Key:
Parameternecessarydelete:

Hello, friends! In this article, we will talk about how to include disks in cd-rom. It was not by chance that I decided to write an article; a user contacted me with the question that after a minor glitch, the autorun of CDs and DVDs stopped working for him. Let's take a little look at why disk autorun is needed in general.

For example: you have a CD or DVD with a program, game or movie, you open the CD-ROM and put the disc in it, the drive works, but nothing appears on the desktop for further actions.

You have to open “My Computer” and at the same time also open your CD or DVD disc in order to play it. Agree this is not very convenient and then let’s look at how to enable or dvd disks.

In order to enable autorun of CDs or DVDs, go to the “Control Panel” and open the “Autorun” control.

You will see this window with autorun settings. For each individual media, you can select the setting you need. See the screenshot, I marked everything with arrows: To enable autorun, check the box next to “Use autorun for all media and devices”, then next to each media, click on the arrow so that a drop-down menu appears with the choice of enabling or disabling CD or DVD autorun.

Dropdown menu settings:

1. If you select the setting - “Install or execute the program from the user’s media”, then when you start the CD or DVD disc, the program or game will begin to be installed immediately. I don't recommend you do this.
2. If you select the setting - “Open a folder to view files using Explorer”, then when you launch a CD or DVD disc in a window on the desktop, the disc with the available information will be opened.
3. If you select the setting - “Do not perform any actions”, then the CD or DVD disc will not autorun.
4. If you select the setting - “Ask every time”, then when you start the CD or DVD disc, a window will appear on the desktop with a choice of actions, “Install” or “Open for viewing”.

If after all the settings you or still doesn't work, then go to the registry. In the Start menu, in the search bar, enter “Regedit”. In the registry window we look for this section
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CDRom
We look in the right column for the value AutoRun, double-click on it with the mouse button. There should be a number in the window that opens 1 this parameter is responsible for enabling CD-ROM autorun, if enabled 0 , this means that autorun is disabled.

Let's move on. If you have everything enabled in the registry, but CD autorun does not occur, then do the following. Go to “Device Manager”, select “DVD and CD-ROM drives”, right-click on the device and delete it. We restart the computer, after rebooting, the system will install the required driver and detect the device.

Well, that seems to be all, I hope that the article described everything clearly and that this information at least somehow helped you. If you have anything to add to the article, write in the comments, I will be glad to communicate. Good luck to all!!!

While working on a computer, different situations happen. Sometimes incorrect operation of applications and crashes can lead to the operating system no longer recognizing one of the drives (D, E - the name depends on the number of drives installed on a particular computer). What can be done in this case?

Instructions

Hello everyone Today we will look at the hard drive on a laptop, although this method will work if you have a simple regular computer. So I have Windows 7, I hope you do too, and if not, then it’s okay, because in Windows 10 everything is almost the same, no complications!

Now a little about the hard drive itself. You know, many people say, well, sometimes they say that the laptop slows down. Well, yes, this happens. Do you know why it slows down? Well, the hard drive takes it and slows it down! It is in most cases that the hard drive slows down the laptop! But not all users know about this, so if the laptop slows down, then some simply buy a new laptop... Well, this is of course a solution, but not entirely correct.. It was worth just installing an SSD drive and the laptop would come to life, and at the same time it would come to life decently... Okay guys, this is a bit of lyrical shmirik, not exactly what I wanted to write about here

This means again, all things will happen in Windows 7, for other Windows everything is almost the same. Well, the truth is, if you have Windows XP, then I won’t lie, I don’t remember exactly how to look at the hard drive, well, that is, what you need to click, but it seems that this information can be viewed in the device manager.

So, the first thing you need to do is open the My Computer window, to do this, hold down Win + R and write the following command there:

You'll probably think, what nonsense, why use such jokes to open the My Computer window? And I’ll tell you why, in Windows 10 I personally didn’t immediately understand how to open this window and therefore, just in case, I showed this universal method!

The My Computer window has opened, great, now here you need to right-click on any drive and select Properties there:

The properties window for the selected disk will appear, there you need to go to the Hardware tab, and it is on this tab that you will have the MODELS of your hard drives indicated. Please note that you may have several local partitions, but you may only have one physical disk. In general, this tab is where the models are written:

If anything, then this column Name, well, where the disk models are written, then you can expand it and you will see the full name of the model

Well, is it approximately clear? Now you know how to view the hard drive in a laptop? If this is not enough for you, then I understand, in this case I advise you to download the AIDA64 program, this program shows absolutely all the information about the laptop’s hardware! It’s easy to download on the Internet, it’s on every corner. You launch the program, go to Data Storage and select ATA and there there is not only the hard drive model, but also other information.