How to set up a parallel call on Android. How to enable call waiting on Android. Connecting and disconnecting the service

While talking with friends or relatives, you may receive a business call from your boss at work. In order not to miss an incoming call, Beeline subscribers have the opportunity to install a second line. After connecting the option, you don’t have to worry about missing important conversations.

The “Call Waiting” option allows the subscriber to put one conversation on hold and receive a parallel call. Anyone who does not have this service activated will not be able to get through during a call. In such situations, the second line may hear that the subscriber is busy and cannot answer.

When connected, you can not only receive incoming calls during a conversation, but also call a second subscriber by putting the first one on hold. The service is free and available to everyone, regardless of the connected tariff.

How to connect “Call Waiting” from Beeline

Making a second line is quite simple and there are different ways to do this:

1. Install using *43# command .
2. Turn on Beeline via your computer or phone by finding this function.
3. Your phone settings may have a “Call Waiting” feature. It needs to be turned on.

If the function becomes unstable, it should be reconnected. To do this, you need to send a request with the code * 110 * 041 # .

Option management

During negotiations on the first line, the second will make itself known with short beeps. To answer an incoming call, you need to click on “Call Hold” in a conversation with the first caller.

How to disable the second line

The option is free, so the service does not provide commands to directly disable it. However, if you need to disable the Beeline “Call Waiting” service, you can do this in several ways:

• Log in from any device and go to function management. It shows all connected services that can be disabled;
• go to the nearest Beeline office and ask the consultant to remove the option from the number;
• Call the toll-free number and leave a request to the dispatcher to disable this function.

Each MTS subscriber has access to the “Call Waiting and Hold” service, the activation of which allows you not to miss a single important call. That is, you will be able to receive a call even when you are already talking with another subscriber. In most cases, the service does not require connection and is activated automatically on all tariffs. However, in some cases, you need to connect the service yourself, and few people know how to connect a second line to MTS.

As part of this review, we will tell you what the “Call Waiting and Holding” service is and how you can activate it. We will also look at the characteristic features of the service that the operator does not pay due attention to, but they can play an important role for the subscriber.

Connecting a second line to MTS

The Call Waiting and Hold service allows you to accept an incoming call even if you are already talking to another subscriber. During a conversation and a simultaneous call, you will hear a signal, which means that another subscriber is calling you.

You will be able to answer an incoming call or call another person while holding the current conversation. When you hear the second incoming call signal, you can perform several different actions.

• If you receive an incoming call during a conversation, you can:
• Ignore the beep and continue communicating;
• Refuse an incoming call by pressing the number 0;
• Interrupt the conversation and accept the incoming call by pressing number 1;
• Leave the first caller on hold and accept the incoming call by pressing the number 2 or the accept call button;

N - hold all active calls and make a new call to phone number N.

It should be noted that many modern phones support the “Call Waiting” function, thanks to which switching between connections with different subscribers occurs in a simpler way. Before connecting a second line to MTS, you should make sure that the service has not been activated previously. You can check the service status using the command *#43#. If you entered into an agreement with MTS later than March 13, 2009, then the “Call Waiting and Holding” service should be activated automatically. The second line can only be missing if you previously disabled it yourself. If the MTS SIM card was purchased before March 13, 2009, then in order to

to connect a second line to MTS, dial *43# on your phone.

We have all long been accustomed to the fact that almost every useful service costs money. This is especially true when it comes to the services of cellular operators. We found out how to connect a second line to MTS, but how much will you have to pay for it? Oddly enough, but The “Call Waiting and Hold” service is completely free. There is no service connection fee or subscription fee. However, if the call is put on hold, you will have to pay for two calls at the same time. Tariffing is carried out in accordance with the terms of your tariff plan.

The service supports one held and one active call. It is not possible to answer the third incoming call; to do this, you must end one of the previous ones.

In conclusion, it should be said that the second line allows you not only to receive a second incoming call, but also to make outgoing calls. You can call another while you are talking to the current subscriber, and the current call will be put on hold.

When we talk on a mobile phone, other subscribers trying to call us are forced to wait until the busy line is free. At the same time, few people know that all Russian operators support such quite common functionality as a second line. This functionality is provided by the MTS operator with the Call Waiting and Holding service. How to connect a second line to MTS and what is needed for this?

The second line is the opportunity not to lose two simultaneous calls. For example, you are talking with relatives and waiting for a work call. When this call arrives, you will hear a characteristic beeping sound in the handset and will be able to accept the second incoming call, leaving the first call on hold. The same applies to outgoing calls - while talking to one subscriber, you can put him on hold and call another subscriber.

In this review, we will look in detail at how the “Call Waiting and Holding” service works, which offers us a second line on MTS.

Having a second line will allow us not to miss an important call when making an ongoing call. In this case, the second caller the subscriber will not hear hang-up signals, but an offer to wait until the called party can accept the call. At this time, the called subscriber will hear a “beeping” signal on his phone, notifying him of another incoming call. Upon hearing the second incoming call signal, the caller can do the following:

• Continue the current conversation, ignoring the second incoming call;
• Press the number 2 and the green key, accepting the second call and leaving the first caller on hold;
• Press the number 1 and the green key, accepting the second call and completely ending the first call;
• Press the number 0 and the green key - the second call will be dropped, and the current conversation will be continued.

All these actions can be performed without number keys, using the functionality of your mobile phone.

Second line support, as well as hold functions for ongoing calls, are available in all modern mobile phones and smartphones. Moreover, it is impossible to accept the third incoming call - this subscriber will hear a busy signal.

By the way, having a second line allows you not only to receive additional incoming calls, but also to make outgoing calls - for this you can right in the middle of a conversation with the current subscriber, dial the desired number and press the call button. After this, the current call will be placed on hold, and we will be able to call another subscriber.

As for charging, it all depends on the direction of the current and held calls. Both incoming calls will be free, and both outgoing calls will be charged according to the direction of calls, for example, intercity calls within Russia and local outgoing rates. When you are in intranet, national or international roaming, tariffs will correspond to the roaming tariff schedule for a particular direction.

If necessary, they can connect a second line to MTS all subscribers, regardless of tariff plan. To do this, dial a simple USSD command *43# on your mobile phone. The same command checks the status of the “Call Waiting and Holding” service, which provides second line functionality.

How to set up a second line on MTS through the phone menu

Many mobile phones, including older ones, allow you to connect a second line through the call settings menu. Find this menu, check the status of the service through it, and then connect it. The MTS Called You service will allow you to not miss an important call when your phone was unavailable, thanks to which you can get all the information about missed calls.

How to disable the second MTS line

Disabling the second line on MTS is done via the USSD command *43# or through the corresponding mobile phone menu.

For subscribers who connected after March 13, 2009, the “Call Waiting and Hold” service was activated automatically. If you connected to the MTS network before this date, activate the second line yourself using the tools presented in the review.

The mobile operator Tele2 has its own call holding service, the so-called “Second Line”.

Call hold (Second line) is the ability to use several incoming lines without dropping the call. A special sound signal will notify you of a new call.

How to hold the second line

The retention process takes place in 2 stages:

1. Waiting is the stage of making a decision about a call coming to the second line. Several short calls indicate that during the conversation, there was another incoming call.
2. Hold - the stage of transition from an active conversation to the second line without interrupting the connection with the first incoming call, entering a command for further actions.

Teams are divided into:

1. Button "0" - Rejects the second incoming call.
2. Button "1" - Answers the second incoming call and disconnects the first (call reset).
3. Button "2" - Answers the second incoming call and turns on the hold function for the first call. The “2” button also serves as a reverse switch between subscribers or sessions.

After entering any of the commands, you should activate it by pressing the call button.

While waiting, pleasant music is played to the subscriber.

Until recently, this feature was enabled automatically after you inserted and activated the SIM card.

Now whether to enable or disable this feature is decided by the subscriber himself. To activate the service, you need to contact the company’s office or select an item in the phone menu related to this service. The service is free upon activation and does not require additional financial investments. The service is convenient when there is a large volume of incoming calls, in order to prioritize responses to these calls.

The article about the “Second line from MTS” option will give you complete information on how to connect and disconnect this service.

Often, MTS users need to connect or disconnect a service. You decide for yourself what service you need, you yourself calculate how much money you are willing to spend on it. You have every right to enable any option. For example, service "Mobile Internet" now one of the most popular. People increasingly want to be in touch with the world, and MTS provides them with its services, offering loyal Internet tariffs. MTS will offer you a wide choice of connecting various options. Visit the official cellular website MTS (www.mts.ru), where you can see the full list of services offered by the company. Service “Call waiting and holding”, which is the same as "Mobile Internet" It is also considered one of the most popular options.

“Second line” from MTS: what is it?

We will look in detail at what this service is, when it appeared, why it is needed, and how to connect it. Previously, if a subscriber was talking, then the other caller heard beeps, which informed him that the subscriber was busy. Option “Call waiting and hold” or “Second line” automatically connected on all MTS tariff plans for those subscribers who use cellular communications MTS since March 13, 2009 and does not require any action from its clients. Those who joined earlier, that is until March 13, 2009, but wants to connect and use this option, they can enter a free one on their phone USSD request.

This service prevents the subscriber from missing important calls. “Second line”– this is an opportunity to keep two subscribers in touch at once. A person has the right to receive incoming calls even when he is already talking with someone on his mobile phone. You can ignore or reject the call, or answer, then the first interlocutor will have to wait a little on the second line. But it is possible that the second caller disconnects himself. This service works similarly with outgoing calls. During a dialogue with a subscriber, you can make important outgoing calls, while maintaining a conversation already in progress.

Let's analyze the work “Second line” For example. You are talking on the phone with your best friend, but at the same time, you are expecting a call from a work colleague. When you receive a second call, you hear a periodic sound - this means that you are receiving a call. You accept the second incoming call, while the first call goes on hold. The situation is similar with outgoing calls. For example, a work employee called you and asked you to clarify the data, and in order to clarify it, you should call the customer. Without disconnecting the employee, you dial the customer’s number and find out the data. After you have all the information, disconnect from the “second line”. All this time, an employee was waiting for you on the “first line”, to whom you pass on the information received. Everything is very simple. You save not only your time, but also the time of other people.

“Second line” from MTS: operating principle

If the caller comes across someone who is already talking, he will hear a polite request to wait. In turn, the talking subscriber hears periodic sounds that inform him about the presence “second line”.

The subscriber himself decides which line is more important to him and makes a decision. The decisions a person can make are:

• He can ignore the incoming call, continuing with the current conversation;
• If the second caller persistently calls you, then in order to answer him, you should first enter a number “2”, and then the green call button, but in such cases the first caller goes into mode “expectations”;
• If the second incoming call is very important and involves a long conversation, then in order to answer the second caller and interrupt the conversation with the first, you should first press the number first “1” , and then the green call key;
• It also happens that the second incoming call comes from a person who is not interesting to you, and you do not want to talk to him. The periodic sound begins to bother or distract you, then the second incoming call is reset by pressing the number “0” and still the same green call button, while the current dialogue is not interrupted.

Please note that currently the MTS mobile network has the ability to offer its customers two call modes simultaneously - held and active mode. In order to accept the third incoming call, you need to end any previous conversation. If this is not done, then the third subscriber will in any case only be able to hear busy tones.

As for charging, it all depends on the side of the active and held calls. There will be no charge for incoming calls, and both outgoing calls will be charged under the tariff plan you are using. Long-distance calls within Russia are charged at local outgoing rates. If the subscriber is in national or international roaming, then the cost of calls will be paid according to the current roaming tariff schedule, depending on the direction.
This option is available to all MTS users. The service is activated using USSD request by combination *43#. This combination also makes it possible to check the status of the service.

“Second line” from MTS: setting up a second line in the MTS mobile network using the telephone menu

Technology keeps up with the times, so even the oldest mobile phone models have the ability to connect another line. What needs to be done for this? It's very simple, to do this you need to visit the call settings. But first, it’s more logical to check the status of the option (whether it’s connected to you or not), and if it’s not connected to you, then connect it. When all the settings have been checked, you can safely start using the service from MTS – “Call waiting and holding” or as they say “Second line”.

Instructions:

1) Find “ Settings" or "Options" in the menu of your mobile phone. Once you are there, find the tab “Challenges”. Scroll until the “Call Waiting” option appears on the screen; if you do not find it, then enter the tab "Extra options" and try to find it there, as soon as you find it - select this function. A new window will open with a choice of options: “Enable”, “Cancel”, “Status”, or just the opposite “Call Waiting” There will be a place for a mark (check mark). Click "Turn on" or check the box. The message will appear on the phone screen “Query running” or “Updating parameters...”. The phone will notify you that the operation was successful with the phrase “Call waiting is on”;
2) If you receive a message with a negative result, for example, “Operation failed” or “Call waiting is not enabled”. The reasons why the negative result came are as follows:

• You attempted to activate the service outside the network area;
• While making a request, the operator could get stuck;
• Your phone may be faulty.

3) Try waiting a short period of time, change your location, or restart your phone. After the above steps have been completed, try again.
4) You can also activate this option by sending a short USSD request MTS operator. Enter the code on your phone's keypad *43# and press call. Your phone number will automatically connect to the required function. The system will soon notify you that you have activated the service.
The MTS mobile network can also offer you another useful service that will allow you to find out about those calls that were made while the phone was turned off, that is, inaccessible. This service is called “They called you”.

“Second line” from MTS: how to disable this service?

It happens that some subscribers do not need the service “Call waiting and holding”, then how to disable it? Finding out how to refuse to use the “second line” from MTS mobile communications is not difficult. Disconnection from this service is carried out using the previously indicated USSD request in *43# format or use the telephone menu.